BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277711BTC
På lager
SK hynix
SK hynix HMA42GR7MFR4N-TF 64GB (4×16GB) DDR4-2133 CL15 Registered server RAM
Four 16 GB registered DDR4-2133 modules totalling 64 GB at CL15 latency
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- ECCNo
- Buffered/RegisteredRegistered
- 64 GB total capacity from four 16 GB modules
- Registered DDR4-2133 speed for stable server operation
- CL15 CAS latency for responsive data access
- 288-pin DIMM form factor fits standard server slots
- 2 V operation reduces power draw per module
Server-grade capacity
This 64GB kit delivers four 16GB DDR4 modules for registered DIMM slots. It targets administrators expanding memory in rackmount or tower servers that require registered signalling. The CL15 latency and 1.2V operation match baseline DDR4-2133 specifications. Builders needing unbuffered desktop DIMMs or ECC protection should select a different product line.
Thermals and power
Each module runs at the standard 1.2V without a heat spreader, relying on chassis airflow for cooling. Registered buffering adds minimal electrical load compared with unbuffered equivalents at the same frequency. Power draw scales linearly with the four-module population, staying within typical DDR4-2133 limits. Systems with restricted DIMM spacing should verify airflow clearance before installation.
Build and connectors
The 288-pin DIMM form factor fits keyed DDR4 registered slots on compatible server mainboards. Four single-rank 2Rx4 modules populate two channels per socket on many dual-socket platforms. Absence of a heat spreader keeps module height low for dense configurations. Buyers requiring ECC correction or non-registered desktop memory must choose an alternative kit.
Høydepunkter
- 64 GB total capacity from four 16 GB modules
- Registered DDR4-2133 speed for stable server operation
- CL15 CAS latency for responsive data access
- 288-pin DIMM form factor fits standard server slots
- 2 V operation reduces power draw per module
Spesifikasjoner
| Brand | Hynix |
|---|---|
| Series | Server Memory |
| Model | HMA42GR7MFR4N-TF |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| ECC | No |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
Spørsmål om denne varen
How do I install the 288-pin registered DIMMs, and what step is often missed?
Align the notch with the slot key, press straight down until both latches click, and verify the server BIOS recognises all 64 GB; the missed step is forgetting to enable registered-memory support in BIOS.
What maintenance or replacement will the 4×16 GB kit need over time?
No heat spreaders are fitted, so keep chassis airflow clean; if a module fails, replace the single 16 GB stick rather than the full kit.
What limit appears first when the CL15 2133 MT/s modules run sustained workloads?
The CAS-15 latency at 2133 MT/s sets the throughput ceiling before thermal throttling becomes a factor.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280295BTC
På lager
