Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Rectangular E1.S 9.5mm SSD with green circuit board and gold edge connector

Solidigm

Solidigm D7-P5520 3.84TB E1.S 9.5mm PCIe 4.0 enterprise SSD SSDPFUKX038T1N1

SKU CH-98Q8-W8MV5 MPN SSDPFUKX038T1N1

3.84TB E1.S 9.5mm PCIe 4.0 enterprise SSD with 144L TLC 3D NAND and 2,000,000-hour MTBF

  • Form FactorE1.S 9.5mm
  • Capacity3.84TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Max Shock Resistance1,000 G (Max) at 0.5 msec

Options 3.84TB, E1.S 9.5mm, Non-OPAL

Vis 2 flere konfigurasjoner
  • High-capacity 3.84TB storage for dense server workloads
  • Compact E1.S 9.5mm form factor fits space-constrained bays
  • PCIe 4.0 x4 interface enables fast data throughput
  • 144L TLC 3D NAND delivers reliable endurance
  • 2,000,000-hour MTBF supports continuous enterprise operation

Capacity and form factor

This Solidigm D7-P5520 provides 3.84TB of storage in an E1.S 9.5mm form factor built for dense server deployments. It uses 144L TLC 3D NAND and connects through a PCI-Express 4.0 x4 interface.

Who it suits

The drive targets data-centre operators who need high-capacity flash in the compact E1.S footprint with enterprise-grade endurance. Buyers who need a 2.5-inch or M.2 form factor should look at something else.

Deciding specification

The E1.S 9.5mm form factor is the single specification that determines whether this drive fits the target chassis. Only systems designed for this exact module can accept it.

Høydepunkter

  • High-capacity 3.84TB storage for dense server workloads
  • Compact E1.S 9.5mm form factor fits space-constrained bays
  • PCIe 4.0 x4 interface enables fast data throughput
  • 144L TLC 3D NAND delivers reliable endurance
  • 2,000,000-hour MTBF supports continuous enterprise operation

Spesifikasjoner

BrandSolidigm
SeriesD7-P5520
ModelD7-P5520
Form FactorE1.S 9.5mm
Capacity3.84TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Fraktvekt0.17 kg
Pakkestørrelse432 × 313 × 140 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What comes in the single pack and what must be sourced separately for the E1.S 9.5mm drive?

The single pack contains the Solidigm D7-P5520 3.84TB E1.S 9.5mm PCIe 4.0 x4 SSD. A compatible E1.S 9.5mm backplane, PCIe 4.0 x4 slot, and any required mounting hardware or cables are not included and must be sourced separately.

Which capacity and form factor version of the D7-P5520 should I select for a 3.84TB E1.S 9.5mm slot?

Choose the SSDPFUKX038T1N1 model, which delivers exactly 3.84TB in the E1.S 9.5mm form factor with PCIe 4.0 x4 interface and 144L TLC 3D NAND. Other capacities or form factors in the D7-P5520 series will not fit this specific slot requirement.

What does the 2,000,000-hour MTBF indicate for a drive installed in a continuously operating server?

The 2,000,000-hour MTBF is a statistical reliability metric derived from the D7-P5520's design using 144L TLC 3D NAND and PCIe 4.0 architecture. It represents the predicted average time between failures across a large population of drives under specified enterprise workloads, not a guarantee for any single unit.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.