Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

Solidigm

Solidigm D7-PS1030 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD SB5PHA7E016TOP1

SKU CH-51H7-KSE27 MPN SB5PHA7E016TOP1

E3.S 7.5mm PCIe 5.0 enterprise SSD with 1.6TB 176L TLC NAND, 14500 MB/s reads and 3 DWPD endurance

  • Form FactorE3.S 7.5mm
  • Capacity1.6TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 4100 MBps
  • 6TB capacity with 176L TLC 3D NAND for high-density storage
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read speed
  • 2350000 IOPS random read handles intensive enterprise workloads
  • 3 DWPD endurance and 8.7 PBW support sustained write-heavy applications
  • E3.S 7.5mm form factor fits dense server deployments

Solidigm D7-PS1030 1.6TB Enterprise SSD

The Solidigm D7-PS1030 is a 1.6TB enterprise solid state drive built for data-centre servers. It uses an E3.S 7.5mm form factor and a PCI-Express 5.0 x4 interface with 176L TLC 3D NAND. Sequential reads reach up to 14500 MBps and writes up to 4100 MBps.

Suits high-throughput server workloads.

This drive targets storage arrays and compute nodes that demand sustained random performance of 2350000 read IOPS and 350000 write IOPS. It carries a 3 DWPD endurance rating and Opal security. Builders using standard desktop motherboards or laptop slots cannot install the E3.S form factor.

PCIe 5.0 x4 interface decides compatibility

The controller requires a PCI-Express 5.0 x4 backplane or riser to deliver the rated throughput. Systems limited to PCIe 4.0 or 3.0 will restrict bandwidth. Verify the server chassis accepts E3.S 7.5mm drives before purchase.

Høydepunkter

  • 6TB capacity with 176L TLC 3D NAND for high-density storage
  • PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read speed
  • 2350000 IOPS random read handles intensive enterprise workloads
  • 3 DWPD endurance and 8.7 PBW support sustained write-heavy applications
  • E3.S 7.5mm form factor fits dense server deployments

Spesifikasjoner

BrandSolidigm
ModelD7-PS1030
Part NumberSB5PHA7E016TOP1
Form FactorE3.S 7.5mm
Capacity1.6TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 4100 MBps
4KB Random Read2350000 IOPS (4K Blocks)
4KB Random Write350000 IOPS (4K Blocks)
Endurance3 DWPD / 8.7 PBW
MTBF2,500,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)17W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight110g +/- 10g
Fraktvekt0.17 kg
Pakkestørrelse140 × 110 × 17 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What server slot do I need to install this E3.S 7.5mm drive?

The drive fits an E3.S 7.5mm hot-plug bay with a PCIe 5.0 x4 electrical connection.

Will my PCIe 4.0 backplane limit the 14500 MBps sequential read?

Yes, a PCIe 4.0 backplane caps the link at 4.0 speeds, so the 14500 MBps read and 4100 MBps write will not be reached.

Which SMART attribute confirms the 3 DWPD endurance rating is being honoured?

Monitor the "Percentage Used" attribute; it increments as the 8.7 PBW write budget is consumed.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.