Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
E1.S 15mm enterprise SSD with green circuit board and gold edge connector

Solidigm

Solidigm SB5PHV7X038TOP1 D7-PS1010 3.84TB E1.S 15mm PCIe 5.0 x4 enterprise SSD

SKU CH-NHFT-6CEMN MPN SB5PHV7X038TOP1

3.84 TB enterprise SSD in E1.S 15 mm form factor with PCIe 5.0 x4 interface and TLC memory

  • Form FactorE1.S 15mm
  • Capacity3.84TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityOpal

Option 3.84TB E1.S 15mm Opal

Vis 20 flere konfigurasjoner
  • 84TB capacity supports dense server workloads
  • E1.S 15mm form factor fits high-density chassis
  • PCIe 5.0 x4 interface enables fast data transfer
  • TLC memory components balance performance and endurance
  • Opal security protects stored data

Solidigm D7-PS1010 3.84TB E1.S enterprise SSD

The Solidigm D7-PS1010 is a 3.84TB enterprise solid-state drive built in the E1.S 15mm form factor. It connects through a PCI-Express 5.0 x4 interface and uses TLC memory components with Opal security support. This drive is intended for data-centre and server deployments that require high-capacity storage in a compact, hot-pluggable design.

Suited for dense server storage.

This SSD suits administrators building high-density storage arrays in 1U or 2U servers that accept E1.S 15mm drives. It is not for desktop PCs, workstations or laptops that only provide M.2 slots or 2.5-inch U.2/U.3 bays. Buyers who need a boot drive for a consumer motherboard or an external portable drive should look at other form factors.

PCIe 5.0 x4 interface decides platform compatibility

The single specification that determines fit is the PCI-Express 5.0 x4 interface combined with the E1.S 15mm form factor. The server backplane and CPU or chipset must provide a native PCIe 5.0 x4 lane to an E1.S connector; otherwise the drive will not be recognised or will fall back to a slower speed unsupported by this hardware.

Høydepunkter

  • 84TB capacity supports dense server workloads
  • E1.S 15mm form factor fits high-density chassis
  • PCIe 5.0 x4 interface enables fast data transfer
  • TLC memory components balance performance and endurance
  • Opal security protects stored data

Spesifikasjoner

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHV7X038TOP1
Form FactorE1.S 15mm
Capacity3.84TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityOpal
Fraktvekt0.12 kg
Pakkestørrelse140 × 110 × 16 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What server bay height does the E1.S 15mm form factor require?

The drive fits a standard E1.S slot with a 15mm vertical profile; verify your chassis supports that exact height before ordering.

Which PCIe generation must the backplane provide for the PCIe 5.0 x4 interface to operate at full speed?

A PCIe 5.0 x4 backplane is needed; inserting the drive into a PCIe 4.0 or 3.0 slot will limit throughput to that generation's ceiling.

How can I estimate when the TLC memory will reach its write endurance limit?

Use the drive's SMART health attributes — particularly media wear-out indicator and total bytes written — to track remaining life against your workload.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.