Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Small square black case fan 60mm by 25mm with three pin connector

STARTECH

STARTECH FAN6X25TX3H 60x25mm case fan 5000 RPM 26.63 CFM 30 dBA

SKU CH-2MJN-8VWDK MPN FAN6X25TX3H

A 60 mm dual ball-bearing case fan spinning at 5000 RPM moves 26.63 CFM at 30 dBA

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size60mm
  • Fan Thickness25mm

Fan Size 60mm

Model TX3

  • Dual ball bearings extend fan lifespan and reliability
  • 5000 RPM speed delivers 26.63 CFM airflow for warm builds
  • 30 dBA noise level keeps system acoustics low
  • 3-pin connector with tachometer enables speed monitoring
  • 60 x 25 mm form factor fits standard chassis mounts

60 mm high-flow case fan

This 60 mm by 25 mm case fan uses dual ball bearings to deliver 26.63 CFM at 5000 RPM. It is intended for builders who need targeted airflow in tight chassis spaces or for replacing a failed or noisy 60 mm unit in an existing workstation. The 3-pin connector includes a tachometer wire so the system can monitor fan speed in real time.

Check 60 mm mounting and 3-pin header

Verify that your case or heatsink has 60 mm mounting holes with 25 mm clearance for the frame thickness. Confirm the motherboard or fan controller provides a standard 3-pin header; the tachometer signal will not function on a 2-pin connection. No fan controller is included, so speed management depends entirely on the host hardware.

Sustained 5000 RPM airflow at 30 dBA

At continuous 5000 RPM the fan maintains 26.63 CFM while producing 30 dBA of acoustic noise. Dual ball bearings are designed to sustain this speed over long periods without the wear that sleeve bearings exhibit under constant high-RPM operation. The tachometer allows the system to detect any speed drop caused by dust buildup or bearing degradation.

Høydepunkter

  • Dual ball bearings extend fan lifespan and reliability
  • 5000 RPM speed delivers 26.63 CFM airflow for warm builds
  • 30 dBA noise level keeps system acoustics low
  • 3-pin connector with tachometer enables speed monitoring
  • 60 x 25 mm form factor fits standard chassis mounts

Spesifikasjoner

BrandStarTech.com
ModelFAN6X25TX3H
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size60mm
Fan Thickness25mm
Bearing TypeBall
RPM5000 RPM
Air Flow26.63 CFM
Noise Level30 dBA
Power Connector3 Pin
ColorBlack
FeaturesDual Ball Bearings in the cooling fan provides increased airflow, reliability and longer life
Install in your workstation to keep your hardware cool
Replaces a non-functional or a noisy fan in a PC
Dimensions60 x 60 x 25mm
Fraktvekt0.07 kg
Pakkestørrelse114 × 65 × 32 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does the FAN6X25TX3H include mounting screws or a fan controller?

The fan ships as a single 60mm unit with a 3-pin connector; mounting hardware and a separate controller are not included.

Should I choose this 5000 RPM model or a lower-speed version for a quiet build?

At 5000 RPM the fan delivers 26.63 CFM at 30 dBA; a lower-speed model would move less air but also generate less noise.

What does the 26.63 CFM rating mean for actual case temperatures?

It indicates the volume of air the fan can push through a 60x25mm opening at 5000 RPM, helping to lower component temperatures in tighter chassis.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.