Team Group
Team Group T-Force GA PRO 8TB M.2 2280 PCIe 5.0 x4 NVMe Internal SSD TM8FGL008TTC133
- Internal Solid Stat…
- Consumer
768,99 USD
0.00962404BTC
På lager
Team Group
Team Group T-Force GA PRO 4TB M.2 2280 PCIe 5.0 x4 internal SSD TM8FFJ004T0C129
A 4TB M.2 2280 internal SSD with PCIe 5.0 x4 interface, up to 10000 MBps read and 8500 MBps write, DRAM cache, and graphene heatsink
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfacePCI-Express 5.0 x4
Options 4TB
- 8TB
- 4TB
- Up to 10000 MB/s sequential read for rapid game loading
- Up to 8500 MB/s sequential write for fast large-file transfers
- 2400 TBW endurance rating for long-term heavy workloads
- Patented graphene heatsink maintains performance under sustained use
- 1,600,000-hour MTBF indicates high reliability for critical data
Built for PCIe 5.0 x4 systems
This 4TB M.2 2280 internal SSD uses the PCIe 5.0 x4 interface and NVMe protocol to reach 10000 MBps sequential read and 8500 MBps sequential write. A graphene heatsink and the InnoGrit IG5666 controller manage thermals and power states. It is made for consumer workloads that need sustained throughput.
Suits high-throughput builds; not for legacy slots
The drive fits M.2 2280 slots wired for PCIe 5.0 x4 and operates from 0°C to 70°C. It offers 2400TB TBW and 1600000 hours MTBF for heavy write cycles. Systems limited to PCIe 3.0 or 4.0 will not use the full bandwidth, so buyers on older platforms should consider a matching-generation drive.
Deciding spec: 10000 MBps sequential read
That peak read speed only appears when the motherboard provides a PCIe 5.0 x4 link and NVMe 2.0 support. If the platform tops out at PCIe 4.0, the drive will still work but cannot hit the rated figure. Check the slot specification before purchase.
Høydepunkter
- Up to 10000 MB/s sequential read for rapid game loading
- Up to 8500 MB/s sequential write for fast large-file transfers
- 2400 TBW endurance rating for long-term heavy workloads
- Patented graphene heatsink maintains performance under sustained use
- 1,600,000-hour MTBF indicates high reliability for critical data
Spesifikasjoner
| Brand | Team Group |
|---|---|
| Series | T-Force GA PRO |
| Model | TM8FFJ004T0C129 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 10000 MBps |
| Max Sequential Write | Up to 8500 MBps |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,600,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G/0.5ms |
| Max Vibration Resistance | 80Hz~2,000Hz/20G |
| Height | 3.9mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7g |
| Fraktvekt | 0.05 kg |
| Pakkestørrelse | 124 × 95 × 13 mm |
Andre versjoner av denne modellen
1 flere i samme serie
Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.
Spørsmål om denne varen
What M.2 slot key and length does the 2280 form factor require?
The drive uses the M.2 2280 form factor, so it needs an M-key slot that accepts 80 mm long modules.
How do I install the TM8FFJ004T0C129, and which step is most often missed?
Insert the M.2 module into the motherboard M-key slot, then fasten the single retention screw; the step most often missed is securing that screw after seating the drive.
When will the 4 TB drive with 2400 TBW endurance need replacement?
The drive is rated for 2400 TBW and 1,600,000 hours MTBF; replace it once the SMART health indicator reports the endurance reserve is exhausted.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
