Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Gray aluminium and plastic 2.5 inch SATA drive enclosure with rubber shock absorbing case

Transcend

Transcend TS0GSJ25CK3 2.5" SATA drive enclosure

SKU CH-FQ40-VKCSV MPN TS0GSJ25CK3

Converts a 2.5-inch SATA drive into a portable USB 3.0 drive with shock-absorbing rubber protection and one-touch backup software

  • ColorGray
  • Size2.5"
  • TypeEnclosure
  • MaterialAluminum / Plastic
  • Internal InterfaceSATA III
  • External InterfaceSATA III 6Gb/s, USB 3.0 / USB 2.0
  • Turns an internal 2.5" SATA drive into portable USB 3.0 storage
  • Shock-absorbing rubber case and inner cushion protect the drive from bumps
  • One-touch backup button works with Transcend Elite software for quick file copies
  • Supports drives up to 9.5 mm thick; 7 mm to 9.5 mm spacer included
  • Tool-free kit includes screwdriver, M2 screws and USB cable for fast setup

Portable 2.5″ SATA enclosure kit

The Transcend TS0GSJ25CK3 turns a 2.5″ SATA SSD or HDD into an external USB drive. It ships with a rubberised enclosure, a spacer for 7 mm drives, a screwdriver, mounting screws and a USB cable. The kit targets notebook owners who want to reuse an internal drive after an upgrade.

Replaces bare drive handling

Instead of leaving the old drive loose or buying a separate dock, this kit provides a complete, shock-absorbing housing with one-touch backup support via Transcend Elite software. The jump is worth it when you need portable access to the data on the removed drive without opening a desktop chassis.

Tool-free drive swap with spacer

The enclosure opens without tools; the included PH1 screwdriver is only needed for the four M2 screws that secure the drive. The 7 mm to 9.5 mm spacer must be fitted on thinner drives or the SATA connector will not seat. Forgetting the spacer is the most common installation error.

Høydepunkter

  • Turns an internal 2.5" SATA drive into portable USB 3.0 storage
  • Shock-absorbing rubber case and inner cushion protect the drive from bumps
  • One-touch backup button works with Transcend Elite software for quick file copies
  • Supports drives up to 9.5 mm thick; 7 mm to 9.5 mm spacer included
  • Tool-free kit includes screwdriver, M2 screws and USB cable for fast setup

Spesifikasjoner

BrandTranscend
SeriesTranscend StoreJet USB3.1 SSD/HDD ???
ModelTS0GSJ25CK3
Part NumberTS0GSJ25CK3
ColorGray
Size2.5"
TypeEnclosure
MaterialAluminum / Plastic
Internal InterfaceSATA III
External InterfaceSATA III 6Gb/s, USB 3.0 / USB 2.0
HDD Count SupportedSingle HDD
Number of Bay1
Maximum Capacity (per Bay)More than 16TB
PowerDC 5V
SpecificationsOperating Temperature: 0 (32) to 70 degree C (158 degree F)
Certificates: CE, FCC, BSMI
Note: The enclosure is suitable for 2.5 inch HDD or SSD up to 9.5 mm in height.
Operating Systems SupportedPC/ MAC
FeaturesOne-touch backup, Shock absorbing rubber for rugged protection, 2.5-inch, USB, usb2.0, usb3.0, Rubber, The Transcend 2.5" SSD/HDD Enclosure Kit converts an internal 2.5" storage drive for external use by providing an enclosure, SATA adapter, USB cable, and other essential parts. The enclosure is compatible with SSDs and HDDs sporting a SATA interface and a height of up to 9.5mm. For 7mm tall drives, a spacer is provided to help secure the drive within the housing. To protect your drive from shock and vibrations, an outer rubber case and inner rubber shock absorber are included. Once
Dimensions0.74" x 5.10" x 3.18"
Weight3.80 oz.
Package ContentsStoreJet 25CK3 enclosure, USB cable, 7mm to 9.5mm spacer, PH1 screwdriver, M2 mounting screws
Fraktvekt0.24 kg
Pakkestørrelse152 × 119 × 53 mm

Spørsmål om denne varen

What drive height does the 2.5" enclosure accept with the included spacer?

The kit includes a 7mm to 9.5mm spacer so a 7 mm drive fits the 9.5 mm bay; drives up to 9.5 mm tall are supported without the spacer.

Which screw size and tool are needed to secure the drive inside the TS0GSJ25CK3?

Three M2 mounting screws and a PH1 screwdriver are supplied; use the PH1 driver to fasten the M2 screws through the enclosure frame into the drive.

What rubber parts should be checked or replaced if the enclosure's shock protection degrades?

The outer rubber case and inner rubber shock absorber provide the rugged protection; inspect both for cracks or compression loss and replace if they no longer cushion the drive.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.