Western Digital
Western Digital Ultrastar DC SN200 HUSMR7680BDP301 800GB enterprise SSD
800 GB enterprise NVMe SSD with 3 DWPD endurance, 3 350 MB/s reads and 2 100 MB/s writes
- Sustained Sequential Read3350 MB/s
- Sustained Sequential Write2100 MB/s
- Endurance3 DWPD
- MTBF2,000,000 hours
- Form Factor2.5" U.2
- Capacity800GB
- 3350 MB/s sustained read accelerates data-intensive workloads
- 2100 MB/s sustained write supports demanding write-heavy applications
- 3 DWPD endurance rating delivers consistent performance over drive lifetime
- 2,000,000 hours MTBF indicates enterprise-grade reliability
- Power loss protection and dual port safeguard data integrity during unexpected events
Enterprise NVMe SSD for data centres
The Western Digital Ultrastar DC SN200 HUSMR7680BDP301 is an 800GB enterprise SSD built on 15nm MLC flash with a PCIe Gen 3.0 x4 NVMe interface. It fits 2.5-inch U.2 bays and delivers sustained sequential reads of 3350 MB/s and writes of 2100 MB/s. Dual-port connectivity and power-loss protection suit high-availability server and storage arrays.
Replaces lower-endurance or single-port U.2 drives
Moving from a 1 DWPD device or a single-port design gains three drive-writes per day endurance and path redundancy for failover. The jump is worth it when workloads demand consistent write throughput and uninterrupted access during controller or path failures. Secure erase and hot-swap simplify retirement and maintenance without downtime.
Steady performance under continuous load
Sustained sequential figures of 3350 MB/s read and 2100 MB/s write are maintained rather than peaking briefly. A 2,000,000-hour MTBF and 3 DWPD rating back long-term operation in analytics, backup and cloud deployments. Error correcting code and dual-port failover keep data flowing during heavy, prolonged I/O.
Høydepunkter
- 3350 MB/s sustained read accelerates data-intensive workloads
- 2100 MB/s sustained write supports demanding write-heavy applications
- 3 DWPD endurance rating delivers consistent performance over drive lifetime
- 2,000,000 hours MTBF indicates enterprise-grade reliability
- Power loss protection and dual port safeguard data integrity during unexpected events
Spesifikasjoner
| Sustained Sequential Read | 3350 MB/s |
|---|---|
| Sustained Sequential Write | 2100 MB/s |
| Endurance | 3 DWPD |
| MTBF | 2,000,000 hours |
| Brand | Western Digital |
| Series | Ultrastar DC SN200 |
| Model | HUSMR7680BDP301 |
| Part Number | 0TS1884 |
| Form Factor | 2.5" U.2 |
| Capacity | 800GB |
| Interface | PCIe Gen 3.0 x4 |
| Features | Power Loss Protection, Dual Port, Secure Erase, Error Correcting Code, Hot-Swap |
Spørsmål om denne varen
Will this 2.5" U.2 drive fit in a standard 2.5-inch drive bay with a U.2 backplane?
Yes, the 2.5" U.2 form factor is designed for standard 2.5-inch bays that provide a U.2 NVMe connector.
What is the correct installation step to enable the dual-port feature on this HUSMR7680BDP301?
Connect both U.2 ports to the backplane or controller; the drive will not fail over to the second path if only one port is cabled.
When should I plan to replace this 800GB drive based on its 3 DWPD endurance rating?
At 3 DWPD the drive is warranted for 2,000,000 hours MTBF; monitor SMART wear indicators and replace before the percentage used reaches the rated limit.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
