ZOTAC
ZOTAC GeForce RTX 4060 Ti 8GB Twin Edge OC graphics card ZT-D40610H-10M
Refurbished GeForce RTX 4060 Ti with 8GB GDDR6, 128-bit bus, dual-fan IceStorm 2.0 cooling and factory overclock to 2535 MHz
- InterfacePCI Express 4.0 x8
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 40 Series
- GPUGeForce RTX 4060 Ti
- Boost Clock2535 MHz
- CUDA Cores4352
- DLSS 3 frame generation accelerates 4K gaming with Ada Lovelace architecture
- 8 GB GDDR6 at 18 Gbps on a 128-bit bus feeds high-resolution textures
- IceStorm 2.0 cooling uses dual 90 mm fans with FREEZE stop for quiet idle
- Four display outputs — three DisplayPort 1.4a and one HDMI 2.1a — drive multi-monitor setups
- Compact 226 mm length fits 2.2-slot builds with a 160 W TDP and 8-pin power
ZOTAC GeForce RTX 4060 Ti 8GB Twin Edge OC
This graphics card uses the NVIDIA Ada Lovelace architecture with 4352 CUDA cores and 8GB of GDDR6 memory on a 128-bit interface. It targets gamers and creators who need high frame rates at 1080p or 1440p resolution. The compact dual-fan design fits standard ATX cases with a 226 mm length.
Step up from 8 GB 40-series cards
Moving from an older 8 GB model is worthwhile when you need the higher 2535 MHz boost clock and DLSS 3 frame generation for modern titles. The PCI Express 4.0 x8 interface and 18 Gbps memory speed remove bottlenecks in newer engines. An 8-pin power connector and 500W PSU recommendation keep the upgrade simple.
Sustained load with IceStorm 2.0 cooling
The twin 90mm fans run under Active Fan Control and stop completely at low temperatures thanks to FREEZE Fan Stop. A metal backplate adds structural rigidity and helps spread heat during long sessions. The 160W thermal design power stays manageable inside compact builds.
Høydepunkter
- DLSS 3 frame generation accelerates 4K gaming with Ada Lovelace architecture
- 8 GB GDDR6 at 18 Gbps on a 128-bit bus feeds high-resolution textures
- IceStorm 2.0 cooling uses dual 90 mm fans with FREEZE stop for quiet idle
- Four display outputs — three DisplayPort 1.4a and one HDMI 2.1a — drive multi-monitor setups
- Compact 226 mm length fits 2.2-slot builds with a 160 W TDP and 8-pin power
Spesifikasjoner
| Brand | ZOTAC |
|---|---|
| Series | Twin Edge |
| Model | ZT-D40610H-10M |
| Interface | PCI Express 4.0 x8 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 40 Series |
| GPU | GeForce RTX 4060 Ti |
| Boost Clock | 2535 MHz |
| CUDA Cores | 4352 |
| Effective Memory Clock | 18000 MHz (18 Gbps) |
| Memory Size | 8GB |
| Memory Interface | 128-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1a |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Cooler | Double Fans |
| Thermal Design Power | 160W |
| Recommended PSU Wattage | 500W |
| Power Connector | 8-Pin |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 226 mm |
| Slot Width | 2.2 Slots |
| Fraktvekt | 1.09 kg |
| Pakkestørrelse | 282 × 218 × 84 mm |
Spørsmål om denne varen
Will the 226 mm length and 2.2-slot width fit in a compact ATX case?
The card measures 226 mm long and occupies 2.2 slots, so verify your case GPU clearance and slot spacing before purchase.
Does the single 8-pin power connector seat fully on a modular PSU cable?
Insert the 8-pin connector until the latch clicks; the common mistake is leaving it partially seated, which causes instability under load.
How often should the twin 90 mm fans and metal backplate be cleaned?
Use compressed air every few months to clear dust from the fan blades and backplate fins, maintaining IceStorm 2.0 cooling performance.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



