Zyvpee
Zyvpee KDE1207PKV1 70 mm 3-pin case fan 1600-1999 RPM
A 70 mm case fan running 1600-1999 RPM on a 12 V 3-pin connector for CPU cooling
- TypeCase Fan
- CompatibilityCPU Cooler
- RPM1600-1999 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Efficient CPU cooling from a 70 mm frame
- 3-pin 12 V connector draws only 2.0 W
- Speed range of 1600 to 1999 RPM
- Compact 70 × 20 mm size fits tight builds
- Non-LED black design keeps the interior clean
Zyvpee KDE1207PKV1 70 mm 3-pin case fan
The Zyvpee KDE1207PKV1 is a 70 mm case fan designed for CPU cooler compatibility. It operates on 12 V DC power and draws 2.0 W. The fan spins between 1600 and 1999 RPM. It suits builders needing a compact cooling solution for tight spaces.
3-pin power connector and 70*20 mm frame
A three-pin power connector supplies voltage and a tachometer signal without PWM control. The 70 mm by 20 mm frame matches standard 7020 mounting holes. Black blades and a non-LED design keep the appearance neutral inside any chassis.
Fixed-speed range on a 3-pin interface
The 3-pin interface limits speed adjustment to voltage regulation rather than duty-cycle control. Minimum speed stays at 1600 RPM, so silent operation at lower loads is not possible. Builders requiring finer speed curves or quieter idle noise should consider a 4-pin PWM alternative.
Høydepunkter
- Efficient CPU cooling from a 70 mm frame
- 3-pin 12 V connector draws only 2.0 W
- Speed range of 1600 to 1999 RPM
- Compact 70 × 20 mm size fits tight builds
- Non-LED black design keeps the interior clean
Spesifikasjoner
| Brand | Zyvpee |
|---|---|
| Series | KDE1207PKV1 |
| Model | KDE1207PKV1 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| RPM | 1600-1999 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 70*20MM |
Spørsmål om denne varen
What does the 3-pin connector limit for the Zyvpee KDE1207PKV1 fan?
The 3-pin connector provides voltage control only, so speed varies with the supplied voltage rather than a PWM signal.
What clearance does the 70 mm by 20 mm frame need to mount?
The fan requires a 70 mm square opening and 20 mm depth, matching standard 7020 mounting holes.
How is the Zyvpee KDE1207PKV1 installed, and what step is often missed?
Screw the fan into the 70 mm mount, then connect the 3-pin header to the motherboard; the step often missed is setting the fan curve in BIOS so the 1600-1999 RPM range is actually used.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



