A-Tech
A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V for Micron MT36KSF1G72PZ-1G4 server RAM
8GB DDR3L 1333 ECC registered DIMM at 1.35V with 2Rx4 organisation for server upgrades
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- ECC registered design protects data integrity in server workloads
- DDR3L 1333 speed delivers reliable throughput for enterprise tasks
- 35 V low voltage reduces power draw and heat in dense racks
- 2Rx4 dual-rank organisation maximises capacity per DIMM slot
- 240-pin DDR3 form factor fits compatible Micron replacement part numbers
8GB DDR3L 1333 ECC RDIMM for servers
This 8GB registered DDR3L module operates at 1333 MHz with CL9 latency and 1.35V voltage. It uses a 2Rx4 organisation and major-brand chips on a 240-pin DIMM. The part replaces Micron MT36KSF1G72PZ-1G4 and compatible variants in server and workstation platforms.
Thermals noise and power draw
DDR3L 1.35V modules draw less power than standard 1.5V DDR3, reducing heat output in dense memory configurations. Registered buffering adds negligible latency while improving signal integrity across populated channels. Passive cooling in typical server airflow is sufficient for normal operation.
ECC registered compatibility
ECC and registered signalling are mandatory; the module will not function in consumer boards that lack both features. Verify that your system accepts 2Rx4 8GB DDR3L RDIMMs before purchase.
Öne çıkanlar
- ECC registered design protects data integrity in server workloads
- DDR3L 1333 speed delivers reliable throughput for enterprise tasks
- 35 V low voltage reduces power draw and heat in dense racks
- 2Rx4 dual-rank organisation maximises capacity per DIMM slot
- 240-pin DDR3 form factor fits compatible Micron replacement part numbers
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Bu ürünle ilgili sorular
How do I install this 240-pin DDR3L ECC RDIMM and what step is often missed?
Align the notch on the 240-pin module with the DDR3L DIMM slot key, press firmly until both retention clips click, then verify in BIOS that the server recognises the 8GB ECC registered module at 1333MHz.
What maintenance or replacement will this 1.35V DDR3L server memory need over time?
No routine maintenance is required; keep the server airways clean so the registered DIMM stays cool, and replace the module only if ECC error counts rise or the system fails to POST with it installed.
What limit appears first when this CL9 2Rx4 RDIMM runs under sustained load?
The registered buffer and 1.35V DDR3L specification cap sustained throughput at the rated 1333MHz CL9 timing; exceeding this requires a platform that supports higher DDR3L speeds.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.



