Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V for Micron MT36KSF1G72PZ-1G4 server RAM

SKU CH-C1RV-PDSFR

8GB DDR3L 1333 ECC registered DIMM at 1.35V with 2Rx4 organisation for server upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in server workloads
  • DDR3L 1333 speed delivers reliable throughput for enterprise tasks
  • 35 V low voltage reduces power draw and heat in dense racks
  • 2Rx4 dual-rank organisation maximises capacity per DIMM slot
  • 240-pin DDR3 form factor fits compatible Micron replacement part numbers

8GB DDR3L 1333 ECC RDIMM for servers

This 8GB registered DDR3L module operates at 1333 MHz with CL9 latency and 1.35V voltage. It uses a 2Rx4 organisation and major-brand chips on a 240-pin DIMM. The part replaces Micron MT36KSF1G72PZ-1G4 and compatible variants in server and workstation platforms.

Thermals noise and power draw

DDR3L 1.35V modules draw less power than standard 1.5V DDR3, reducing heat output in dense memory configurations. Registered buffering adds negligible latency while improving signal integrity across populated channels. Passive cooling in typical server airflow is sufficient for normal operation.

ECC registered compatibility

ECC and registered signalling are mandatory; the module will not function in consumer boards that lack both features. Verify that your system accepts 2Rx4 8GB DDR3L RDIMMs before purchase.

Kohokohdat

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1333 speed delivers reliable throughput for enterprise tasks
  • 35 V low voltage reduces power draw and heat in dense racks
  • 2Rx4 dual-rank organisation maximises capacity per DIMM slot
  • 240-pin DDR3 form factor fits compatible Micron replacement part numbers

Tekniset tiedot

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install this 240-pin DDR3L ECC RDIMM and what step is often missed?

Align the notch on the 240-pin module with the DDR3L DIMM slot key, press firmly until both retention clips click, then verify in BIOS that the server recognises the 8GB ECC registered module at 1333MHz.

What maintenance or replacement will this 1.35V DDR3L server memory need over time?

No routine maintenance is required; keep the server airways clean so the registered DIMM stays cool, and replace the module only if ECC error counts rise or the system fails to POST with it installed.

What limit appears first when this CL9 2Rx4 RDIMM runs under sustained load?

The registered buffer and 1.35V DDR3L specification cap sustained throughput at the rated 1333MHz CL9 timing; exceeding this requires a platform that supports higher DDR3L speeds.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.