暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 8GB DDR3L 1333 ECC RDIMM 2Rx4 1.35V for Micron MT36KSF1G72PZ-1G4 server RAM

SKU CH-C1RV-PDSFR

8GB DDR3L 1333 ECC registered DIMM at 1.35V with 2Rx4 organisation for server upgrades

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC registered design protects data integrity in server workloads
  • DDR3L 1333 speed delivers reliable throughput for enterprise tasks
  • 35 V low voltage reduces power draw and heat in dense racks
  • 2Rx4 dual-rank organisation maximises capacity per DIMM slot
  • 240-pin DDR3 form factor fits compatible Micron replacement part numbers

8GB DDR3L 1333 ECC RDIMM for servers

This 8GB registered DDR3L module operates at 1333 MHz with CL9 latency and 1.35V voltage. It uses a 2Rx4 organisation and major-brand chips on a 240-pin DIMM. The part replaces Micron MT36KSF1G72PZ-1G4 and compatible variants in server and workstation platforms.

Thermals noise and power draw

DDR3L 1.35V modules draw less power than standard 1.5V DDR3, reducing heat output in dense memory configurations. Registered buffering adds negligible latency while improving signal integrity across populated channels. Passive cooling in typical server airflow is sufficient for normal operation.

ECC registered compatibility

ECC and registered signalling are mandatory; the module will not function in consumer boards that lack both features. Verify that your system accepts 2Rx4 8GB DDR3L RDIMMs before purchase.

特長

  • ECC registered design protects data integrity in server workloads
  • DDR3L 1333 speed delivers reliable throughput for enterprise tasks
  • 35 V low voltage reduces power draw and heat in dense racks
  • 2Rx4 dual-rank organisation maximises capacity per DIMM slot
  • 240-pin DDR3 form factor fits compatible Micron replacement part numbers

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

How do I install this 240-pin DDR3L ECC RDIMM and what step is often missed?

Align the notch on the 240-pin module with the DDR3L DIMM slot key, press firmly until both retention clips click, then verify in BIOS that the server recognises the 8GB ECC registered module at 1333MHz.

What maintenance or replacement will this 1.35V DDR3L server memory need over time?

No routine maintenance is required; keep the server airways clean so the registered DIMM stays cool, and replace the module only if ECC error counts rise or the system fails to POST with it installed.

What limit appears first when this CL9 2Rx4 RDIMM runs under sustained load?

The registered buffer and 1.35V DDR3L specification cap sustained throughput at the rated 1333MHz CL9 timing; exceeding this requires a platform that supports higher DDR3L speeds.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。