Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Clear flexible PVC tubing 16 mm OD 10 mm ID one metre

Alphacool

Alphacool AlphaTube HF 16/10mm Ultra Clear 1m PVC

SKU CH-A6H4-KJ8F6

Clear PVC tubing with 10 mm inner diameter and 16 mm outer diameter, rated for -10 °C to 80 °C and 3 bar working pressure, supplied in a 1 metre length

  • TypeTubing

Color Clear

  • Crystal-clear tubing shows coolant flow
  • 16 mm OD and 10 mm ID fit standard fittings
  • 65-70 A-Shore hardness prevents kinking in tight bends
  • Rated for -10 °C to 80 °C operating range
  • 18 bar burst pressure handles high-pressure loops

AlphaTube HF 16/10mm tubing

AlphaTube HF is a clear PVC tube built for custom water-cooling loops. It connects pumps, radiators, blocks and reservoirs in a single, continuous run. The one-metre length suits compact or test builds. Enthusiasts who prefer rigid acrylic or PETG tubing will not use this flexible hose.

Critical spec: 10 mm ID and 16 mm OD

The inner diameter of 10 mm and outer diameter of 16 mm define every fitting choice. Compression or barb fittings must match these exact dimensions, otherwise the loop will leak. The data sheet also lists an alternative 13 mm OD variant, so verify the 16 mm OD before ordering.

Capacity and limits: 1 metre, 80 °C, 3 bar

One metre covers a simple CPU-to-radiator route with modest bends; longer or complex loops need additional lengths. The hose withstands continuous coolant temperatures up to 80 °C and a working pressure of 3 bar, with a burst rating of 18 bar. Beyond those thermal or pressure limits the material can deform or rupture.

Öne çıkanlar

  • Crystal-clear tubing shows coolant flow
  • 16 mm OD and 10 mm ID fit standard fittings
  • 65-70 A-Shore hardness prevents kinking in tight bends
  • Rated for -10 °C to 80 °C operating range
  • 18 bar burst pressure handles high-pressure loops

Teknik özellikler

TypeTubing

Bu modelin diğer sürümleri

Aynı seriden 4 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How does the 16 mm outer diameter work with standard 3/8" ID compression fittings in a loop?

The tubing has a 10 mm inner diameter and 16 mm outer diameter, matching common 3/8" ID compression fittings for a secure seal in custom water-cooling loops.

What pressure and temperature limits does the PVC tubing handle during operation?

Rated for a working pressure of 3 bar and burst pressure of 18 bar, with an operating range of -10 °C to 80 °C.

What clearance is needed for the 1 m length and 16 mm OD when routing inside a case?

The 1 m length of 16 mm OD PVC tubing has a 65–70 Shore A hardness, giving enough rigidity to resist kinking while remaining flexible for tight routing.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.