DELL
DELL 400-ADPJ 600GB 3.5" SAS 15000 RPM internal hard drive
A 600 GB 3.5 inch SAS 6Gb/s internal hard drive spinning at 15000 RPM for high-speed server storage
- InterfaceSAS 6Gb/s
- Capacity600GB
- RPM15000 RPM
- Form Factor3.5"
- 15000 RPM spindle speed accelerates data access
- 600 GB capacity stores large workloads
- SAS 6Gb/s interface enables fast transfers
- 5 inch form factor fits standard bays
- New condition ensures full reliability
Dell 400-ADPJ 600GB 15K SAS drive
The Dell 400-ADPJ is a 600GB 3.5-inch internal hard drive spinning at 15000 RPM with a SAS 6Gb/s interface. It is supplied new as a hybrid HDD kit for desktop and server installations. The 15K spindle speed targets workloads that demand low latency and high sustained throughput. This drive suits environments where rapid data access is a priority.
Suits transactional databases
This drive fits servers and workstations that require 15000 RPM performance over a SAS 6Gb/s connection. Buyers who need larger capacity per spindle should look at alternative drives. Systems without a SAS controller or backplane cannot attach this device. The 3.5-inch form factor requires a compatible drive bay.
15000 RPM spindle speed
The defining specification is the 15000 RPM rotational speed, which determines the drive's random I/O capability and access latency. This figure separates the 400-ADPJ from lower-speed nearline drives in the same capacity class. Verify that your controller supports 6Gb/s SAS to utilise the interface bandwidth. The 600GB capacity is fixed for this model.
Öne çıkanlar
- 15000 RPM spindle speed accelerates data access
- 600 GB capacity stores large workloads
- SAS 6Gb/s interface enables fast transfers
- 5 inch form factor fits standard bays
- New condition ensures full reliability
Teknik özellikler
| Interface | SAS 6Gb/s |
|---|---|
| Capacity | 600GB |
| RPM | 15000 RPM |
| Form Factor | 3.5" |
Bu ürünle ilgili sorular
Will the 3.5" form factor fit my server's drive bay?
The drive uses a standard 3.5" form factor designed for compatible SAS hot-swap bays in Dell PowerEdge servers.
How do I install the SAS drive correctly?
Slide the carrier into the hot-swap bay until the latch clicks; the common error is not seating the SAS connector fully before locking the handle.
When should I plan to replace the 15000 RPM drive?
Monitor SMART attributes for reallocated sectors or rising seek errors; high RPM mechanical drives typically show wear after several years of continuous operation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
