暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive in hybrid carrier tray

DELL

DELL 400-ADPJ 600GB 3.5" SAS 15000 RPM internal hard drive

SKU CH-6TRJ-QA715

A 600 GB 3.5 inch SAS 6Gb/s internal hard drive spinning at 15000 RPM for high-speed server storage

  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • RPM15000 RPM
  • Form Factor3.5"
  • 15000 RPM spindle speed accelerates data access
  • 600 GB capacity stores large workloads
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits standard bays
  • New condition ensures full reliability

Dell 400-ADPJ 600GB 15K SAS drive

The Dell 400-ADPJ is a 600GB 3.5-inch internal hard drive spinning at 15000 RPM with a SAS 6Gb/s interface. It is supplied new as a hybrid HDD kit for desktop and server installations. The 15K spindle speed targets workloads that demand low latency and high sustained throughput. This drive suits environments where rapid data access is a priority.

Suits transactional databases

This drive fits servers and workstations that require 15000 RPM performance over a SAS 6Gb/s connection. Buyers who need larger capacity per spindle should look at alternative drives. Systems without a SAS controller or backplane cannot attach this device. The 3.5-inch form factor requires a compatible drive bay.

15000 RPM spindle speed

The defining specification is the 15000 RPM rotational speed, which determines the drive's random I/O capability and access latency. This figure separates the 400-ADPJ from lower-speed nearline drives in the same capacity class. Verify that your controller supports 6Gb/s SAS to utilise the interface bandwidth. The 600GB capacity is fixed for this model.

特長

  • 15000 RPM spindle speed accelerates data access
  • 600 GB capacity stores large workloads
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits standard bays
  • New condition ensures full reliability

仕様

InterfaceSAS 6Gb/s
Capacity600GB
RPM15000 RPM
Form Factor3.5"

この商品に関する質問

Will the 3.5" form factor fit my server's drive bay?

The drive uses a standard 3.5" form factor designed for compatible SAS hot-swap bays in Dell PowerEdge servers.

How do I install the SAS drive correctly?

Slide the carrier into the hot-swap bay until the latch clicks; the common error is not seating the SAS connector fully before locking the handle.

When should I plan to replace the 15000 RPM drive?

Monitor SMART attributes for reallocated sectors or rising seek errors; high RPM mechanical drives typically show wear after several years of continuous operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。