نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

DELL

DELL 400-ADPJ 600GB 3.5" SAS 15000 RPM internal hard drive

SKU CH-6TRJ-QA715

A 600 GB 3.5 inch SAS 6Gb/s internal hard drive spinning at 15000 RPM for high-speed server storage

  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • RPM15000 RPM
  • Form Factor3.5"
  • 15000 RPM spindle speed accelerates data access
  • 600 GB capacity stores large workloads
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits standard bays
  • New condition ensures full reliability

Dell 400-ADPJ 600GB 15K SAS drive

The Dell 400-ADPJ is a 600GB 3.5-inch internal hard drive spinning at 15000 RPM with a SAS 6Gb/s interface. It is supplied new as a hybrid HDD kit for desktop and server installations. The 15K spindle speed targets workloads that demand low latency and high sustained throughput. This drive suits environments where rapid data access is a priority.

Suits transactional databases

This drive fits servers and workstations that require 15000 RPM performance over a SAS 6Gb/s connection. Buyers who need larger capacity per spindle should look at alternative drives. Systems without a SAS controller or backplane cannot attach this device. The 3.5-inch form factor requires a compatible drive bay.

15000 RPM spindle speed

The defining specification is the 15000 RPM rotational speed, which determines the drive's random I/O capability and access latency. This figure separates the 400-ADPJ from lower-speed nearline drives in the same capacity class. Verify that your controller supports 6Gb/s SAS to utilise the interface bandwidth. The 600GB capacity is fixed for this model.

أبرز المميزات

  • 15000 RPM spindle speed accelerates data access
  • 600 GB capacity stores large workloads
  • SAS 6Gb/s interface enables fast transfers
  • 5 inch form factor fits standard bays
  • New condition ensures full reliability

المواصفات

InterfaceSAS 6Gb/s
Capacity600GB
RPM15000 RPM
Form Factor3.5"

أسئلة حول هذا المنتج

Will the 3.5" form factor fit my server's drive bay?

The drive uses a standard 3.5" form factor designed for compatible SAS hot-swap bays in Dell PowerEdge servers.

How do I install the SAS drive correctly?

Slide the carrier into the hot-swap bay until the latch clicks; the common error is not seating the SAS connector fully before locking the handle.

When should I plan to replace the 15000 RPM drive?

Monitor SMART attributes for reallocated sectors or rising seek errors; high RPM mechanical drives typically show wear after several years of continuous operation.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.