Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Half-height blade server, silver metal chassis, two 2.5-inch drive bays, front bezel absent

DELL

DELL PowerEdge M640 Blade Server 2x Xeon 8160 24-Core 2.1GHz 128GB DDR4 H330 10Gb Daughter Card

SKU CH-RNK5-H6733

Half-height blade server with dual 24-core Xeon 8160 processors at 2.1 GHz, 128 GB DDR4, PERC H330 RAID controller and dual-port 10 Gb Ethernet daughter card

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 128GB

SSD (Installed) No

  • Dual Xeon Platinum 8160 CPUs provide 24 cores each at 2.1 GHz base
  • 128 GB DDR4 2666 MHz ECC memory across 8 slots
  • PERC H330 controller supports RAID 0/1/5/10/50 for 2.5" drives
  • Broadcom 57810S-K daughter card adds dual 10 Gb Ethernet ports
  • iDRAC 9 Enterprise enables full remote management out of band

Dell PowerEdge M640 Blade Server

This Dell PowerEdge M640 is a half-height blade server built for dense compute environments. It arrives new with two Intel Xeon Platinum 8160 processors, each running at 2.1 GHz with a 3.7 GHz turbo frequency. The system includes 128 GB of DDR4 registered ECC memory across eight 16 GB modules and a PERC H330 storage controller with two 2.5-inch drive caddies.

Suits virtualization and HPC clusters needing

Buyers who need GPU acceleration or direct-attached NVMe storage should look elsewhere because this blade relies on a Matrox G200 graphics controller with 8 MB video memory and the installed H330 controller supports SAS and SATA drives only. The half-height form factor also limits expansion to the single mezzanine card already populated by the 10 Gb dual-port daughter card.

Dual Xeon 8160 24-core processors decide the density

With 24 cores per socket and a maximum of two processors installed, this configuration delivers the highest core count the M640 platform supports. The 16 DIMM slots allow memory to scale to 2 TB, but the CPU choice is fixed and cannot be upgraded beyond the Platinum 8160.

Öne çıkanlar

  • Dual Xeon Platinum 8160 CPUs provide 24 cores each at 2.1 GHz base
  • 128 GB DDR4 2666 MHz ECC memory across 8 slots
  • PERC H330 controller supports RAID 0/1/5/10/50 for 2.5" drives
  • Broadcom 57810S-K daughter card adds dual 10 Gb Ethernet ports
  • iDRAC 9 Enterprise enables full remote management out of band

Teknik özellikler

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc H330 Controller
SSD (Installed)No
Raid LevelRAID 0/1/5/10/50
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much power does the dual 24-core Xeon 8160 configuration draw under sustained load?

The blade uses two Intel Xeon Platinum 8160 processors rated at 2.1 GHz base and 3.7 GHz turbo; actual power draw depends on the chassis power supply and workload.

What chassis and interconnects are required to run this M640 blade?

The M640 is a half-height blade that fits Dell PowerEdge M1000e or MX-series enclosures; the installed Broadcom 57810S-K daughter card provides dual 10 Gb Ethernet through the chassis mid-plane.

Can the PERC H330 controller manage NVMe drives installed in the 2.5" bays?

The PERC H330 supports SAS and SATA RAID 0, 1, 5, 10 and 50; NVMe devices require a different controller and are not supported by this H330.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.