Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

DELL

DELL PowerEdge M640 Blade Server 2x Xeon 8160 24-Core 2.1GHz 128GB DDR4 H330 10Gb Daughter Card

SKU CH-RNK5-H6733

Half-height blade server with dual 24-core Xeon 8160 processors at 2.1 GHz, 128 GB DDR4, PERC H330 RAID controller and dual-port 10 Gb Ethernet daughter card

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 128GB

  • Dual Xeon Platinum 8160 CPUs provide 24 cores each at 2.1 GHz base
  • 128 GB DDR4 2666 MHz ECC memory across 8 slots
  • PERC H330 controller supports RAID 0/1/5/10/50 for 2.5" drives
  • Broadcom 57810S-K daughter card adds dual 10 Gb Ethernet ports
  • iDRAC 9 Enterprise enables full remote management out of band

Dell PowerEdge M640 Blade Server

This Dell PowerEdge M640 is a half-height blade server built for dense compute environments. It arrives new with two Intel Xeon Platinum 8160 processors, each running at 2.1 GHz with a 3.7 GHz turbo frequency. The system includes 128 GB of DDR4 registered ECC memory across eight 16 GB modules and a PERC H330 storage controller with two 2.5-inch drive caddies.

Suits virtualization and HPC clusters needing

Buyers who need GPU acceleration or direct-attached NVMe storage should look elsewhere because this blade relies on a Matrox G200 graphics controller with 8 MB video memory and the installed H330 controller supports SAS and SATA drives only. The half-height form factor also limits expansion to the single mezzanine card already populated by the 10 Gb dual-port daughter card.

Dual Xeon 8160 24-core processors decide the density

With 24 cores per socket and a maximum of two processors installed, this configuration delivers the highest core count the M640 platform supports. The 16 DIMM slots allow memory to scale to 2 TB, but the CPU choice is fixed and cannot be upgraded beyond the Platinum 8160.

Puntos fuertes

  • Dual Xeon Platinum 8160 CPUs provide 24 cores each at 2.1 GHz base
  • 128 GB DDR4 2666 MHz ECC memory across 8 slots
  • PERC H330 controller supports RAID 0/1/5/10/50 for 2.5" drives
  • Broadcom 57810S-K daughter card adds dual 10 Gb Ethernet ports
  • iDRAC 9 Enterprise enables full remote management out of band

Especificaciones

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc H330 Controller
SSD (Installed)No
Raid LevelRAID 0/1/5/10/50
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How much power does the dual 24-core Xeon 8160 configuration draw under sustained load?

The blade uses two Intel Xeon Platinum 8160 processors rated at 2.1 GHz base and 3.7 GHz turbo; actual power draw depends on the chassis power supply and workload.

What chassis and interconnects are required to run this M640 blade?

The M640 is a half-height blade that fits Dell PowerEdge M1000e or MX-series enclosures; the installed Broadcom 57810S-K daughter card provides dual 10 Gb Ethernet through the chassis mid-plane.

Can the PERC H330 controller manage NVMe drives installed in the 2.5" bays?

The PERC H330 supports SAS and SATA RAID 0, 1, 5, 10 and 50; NVMe devices require a different controller and are not supported by this H330.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.