Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Half-height blade server, silver metal enclosure, two 2.5-inch drive bays visible

DELL

DELL PowerEdge M640 Blade Server 2x Xeon Gold 6154 3.0GHz 18-Core 64GB DDR4 2x 960GB SSD

SKU CH-23S0-BXTWC

Half-height blade server with dual 18-core Xeon Gold 6154 processors, 64 GB DDR4 memory and two 960 GB SATA SSDs

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.00 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores18-Core Processor

Installed Memory Size 64GB

SSD (Installed) 2 x 960GB SATA SSD

  • Dual 18-core Xeon Gold 6154 CPUs deliver 36 cores at 3.0 GHz base
  • 64 GB DDR4-2666 registered ECC memory across four slots for reliable capacity
  • Dell PERC S140 controller enables RAID 0/1/5/10 on SATA/SAS drives
  • Two 960 GB SATA SSDs provide fast solid-state storage in 2.5" bays
  • iDRAC9 Enterprise gives full remote management and automation for blade infrastructure

Blade server for virtualization and HPC

The Dell PowerEdge M640 is a half-height blade server built for dense compute workloads such as virtualization, private cloud and high-performance computing. It ships with two Intel Xeon Gold 6154 processors running at 3.0 GHz with 3.7 GHz turbo across 18 cores each. Installed memory is 64 GB of DDR4 2666 MHz registered ECC across four modules. Storage uses a PERC S140 controller with two 960 GB SATA SSDs in a 2.5-inch bay.

Suits dense racks; not for standalone towers

This blade fits Dell PowerEdge MX and M1000e chassis, so it suits operators who already run those enclosures and need up to 56 cores per node with room to grow to 1.5 TB of memory. Buyers who need a tower or rack-mount server that operates outside a blade chassis should look elsewhere. The integrated Matrox G200 graphics with 8 MB video memory is for management only and cannot drive graphical workloads. No operating system is included.

Slides into chassis; check enclosure compatibility

Installation means sliding the blade into a compatible MX or M1000e slot and cabling the 10 Gb dual-port Broadcom 57810S-K daughter card. iDRAC9 Enterprise gives full remote control once the chassis management module is configured. Common issues are mismatched chassis firmware, missing mezzanine cards for extra I/O, and forgetting that front bezel and ready rails are not supplied. Memory population rules for 16 slots must be followed to reach maximum capacity.

Öne çıkanlar

  • Dual 18-core Xeon Gold 6154 CPUs deliver 36 cores at 3.0 GHz base
  • 64 GB DDR4-2666 registered ECC memory across four slots for reliable capacity
  • Dell PERC S140 controller enables RAID 0/1/5/10 on SATA/SAS drives
  • Two 960 GB SATA SSDs provide fast solid-state storage in 2.5" bays
  • iDRAC9 Enterprise gives full remote management and automation for blade infrastructure

Teknik özellikler

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed3.00 GHz
CPU SocketLGA 3647
Number of CPU Cores18-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc S140 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 960GB SATA SSD
Raid LevelRAID 0/1/5/10
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Which chassis models accept this half-height blade server?

It fits Dell PowerEdge MX and M1000e chassis, which supply power, cooling and the backplane connections the blade needs.

Can the installed PERC S140 controller also manage SAS hard drives that I might keep from an older array?

Yes, the S140 supports both SATA and SAS interfaces, so legacy SAS drives can be used alongside the supplied 960 GB SATA SSDs.

How do I confirm the iDRAC9 Enterprise remote management is active after the blade is seated?

Open a browser to the iDRAC IP address; the dashboard will show the two Xeon Gold 6154 CPUs, 64 GB DDR4 memory and both 960 GB SSDs.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.