Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Aqua blue duplex multimode fibre patch cable with ST connectors, 30m length

Enfain

Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 30m Aqua Blue

SKU CH-FNRT-02T96

OM3 duplex multimode patch cable with ST connectors, 30 m aqua jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss

Length 30m

  • OM3 core supports 10 Gbps over 30 m
  • Typical insertion loss .2 dB keeps signal strong
  • Return loss above 38 dB reduces reflections
  • 0 mm PVC jacket with 330 mm bend radius
  • Ceramic ferrules rated for 1000 mating cycles

Enfain OM3 ST-ST Duplex Cable

This 30-metre multimode fibre patch cord uses an OM3 10-gigabit core and ST connectors on both ends. It is built for short-range links between switches, servers or patch panels in data-centre racks. The aqua jacket identifies the OM3 grade at a glance. It suits installers who need a ready-made duplex run without field termination.

Check connector type and link budget

Verify that both active devices present ST ports and that the link budget allows the stated insertion loss of .2 dB typical and .3 dB maximum. Confirm the 850 nm wavelength matches your transceiver modules. Ensure the 3.0 mm jacket can be routed through existing cable management without exceeding the 330 mm bending radius. The cable is rated for 1000 mating cycles.

Thermals noise and power draw

Passive fibre carries no electrical power, so it adds no heat, no fan noise and no draw to the rack. The PVC jacket operates from -20 °C to +60 °C without active cooling. Return loss exceeds 38 dB, keeping signal reflections low in normal use. No external power supply is required for the cable itself.

Öne çıkanlar

  • OM3 core supports 10 Gbps over 30 m
  • Typical insertion loss .2 dB keeps signal strong
  • Return loss above 38 dB reduces reflections
  • 0 mm PVC jacket with 330 mm bend radius
  • Ceramic ferrules rated for 1000 mating cycles

Teknik özellikler

Bu ürün için henüz yayınlanmış teknik özellik yok.

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What connectors and cable length are included, and is any extra hardware needed?

The cable arrives with ST connectors on both ends in a 30 m duplex run. No additional hardware is required for a standard patch connection.

How do I decide between OM3 and other multimode grades for my link?

OM3 supports 10 Gbit/s at 850 nm over the distances typically found in data-centre racks; choose it when your transceivers and switch ports are rated for 10 G multimode.

What does the 0.2 dB typical insertion loss mean for a live 10 G link?

At 0.2 dB typical loss the cable adds minimal attenuation, keeping the optical budget well within the margin needed for reliable 10 G operation.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.