Enfain
Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 30m Aqua Blue
OM3 duplex multimode patch cable with ST connectors, 30 m aqua jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss
- OM3 core supports 10 Gbps over 30 m
- Typical insertion loss .2 dB keeps signal strong
- Return loss above 38 dB reduces reflections
- 0 mm PVC jacket with 330 mm bend radius
- Ceramic ferrules rated for 1000 mating cycles
Enfain OM3 ST-ST Duplex Cable
This 30-metre multimode fibre patch cord uses an OM3 10-gigabit core and ST connectors on both ends. It is built for short-range links between switches, servers or patch panels in data-centre racks. The aqua jacket identifies the OM3 grade at a glance. It suits installers who need a ready-made duplex run without field termination.
Check connector type and link budget
Verify that both active devices present ST ports and that the link budget allows the stated insertion loss of .2 dB typical and .3 dB maximum. Confirm the 850 nm wavelength matches your transceiver modules. Ensure the 3.0 mm jacket can be routed through existing cable management without exceeding the 330 mm bending radius. The cable is rated for 1000 mating cycles.
Thermals noise and power draw
Passive fibre carries no electrical power, so it adds no heat, no fan noise and no draw to the rack. The PVC jacket operates from -20 °C to +60 °C without active cooling. Return loss exceeds 38 dB, keeping signal reflections low in normal use. No external power supply is required for the cable itself.
商品特色
- OM3 core supports 10 Gbps over 30 m
- Typical insertion loss .2 dB keeps signal strong
- Return loss above 38 dB reduces reflections
- 0 mm PVC jacket with 330 mm bend radius
- Ceramic ferrules rated for 1000 mating cycles
商品規格
本商品目前尚未公佈規格。
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
What connectors and cable length are included, and is any extra hardware needed?
The cable arrives with ST connectors on both ends in a 30 m duplex run. No additional hardware is required for a standard patch connection.
How do I decide between OM3 and other multimode grades for my link?
OM3 supports 10 Gbit/s at 850 nm over the distances typically found in data-centre racks; choose it when your transceivers and switch ports are rated for 10 G multimode.
What does the 0.2 dB typical insertion loss mean for a live 10 G link?
At 0.2 dB typical loss the cable adds minimal attenuation, keeping the optical budget well within the margin needed for reliable 10 G operation.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








