Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black standalone duplicator with 23 SATA slots and 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H23HSATB 1-to-23 SATA Duplicator 150MB/s

SKU CH-YYP9-YS5XM

Standalone SATA duplicator copies up to 23 drives at 150 MB/s with four copy and four erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 23

Target 1 to 23

Data Transfer Rate 150MB/s

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

1-to-23 SATA Duplicator for High-Volume Tasks

The EZ Dupe H23HSATB duplicates one SATA source drive to up to 23 target drives simultaneously. It handles both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives without adapters. A 128M buffer and Athena Controller manage the 150MB/s transfer rate. Standalone operation requires no host computer or software.

Four Copy Modes and Four Erase Standards

Quick Copy transfers only system and file data while Whole Media copies every sector including empty space. All Partitioned Copy and Percentage Copy let you define specific ranges. Erase options include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass compliant with 5220.22-M standards. A 16 x 2 LCD and indication lights show real-time progress.

Check Drive Counts and Power Input Before Ordering

The unit provides 23 target slots so verify you have enough drives to justify the capacity. Target drives must use a SATA interface; other interfaces are not supported. Power requires an AC supply between 115 and 230 V at 50 or 60 Hz. No host connection is needed but ensure physical space for the standalone tower.

Öne çıkanlar

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Teknik özellikler

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH23HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 23
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the Athena Controller or LCD need servicing down the line?

The Athena Controller and 16 x 2 LCD are solid-state components with no moving parts, so no routine servicing is expected.

What limits continuous duplication speed across all 23 targets?

The 150 MB/s transfer rate per slot is the fixed ceiling; total aggregate throughput scales with the number of active targets.

How much fan noise and heat should I expect during all-day runs?

The unit draws 115-230 V AC at 50/60 Hz; normal office ambient conditions keep it within thermal limits without excessive noise.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.