Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone duplicator with 23 SATA slots and 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H23HSATB 1-to-23 SATA Duplicator 150MB/s

SKU CH-YYP9-YS5XM

Standalone SATA duplicator copies up to 23 drives at 150 MB/s with four copy and four erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 23

Target 1 to 23

Data Transfer Rate 150MB/s

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

1-to-23 SATA Duplicator for High-Volume Tasks

The EZ Dupe H23HSATB duplicates one SATA source drive to up to 23 target drives simultaneously. It handles both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives without adapters. A 128M buffer and Athena Controller manage the 150MB/s transfer rate. Standalone operation requires no host computer or software.

Four Copy Modes and Four Erase Standards

Quick Copy transfers only system and file data while Whole Media copies every sector including empty space. All Partitioned Copy and Percentage Copy let you define specific ranges. Erase options include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass compliant with 5220.22-M standards. A 16 x 2 LCD and indication lights show real-time progress.

Check Drive Counts and Power Input Before Ordering

The unit provides 23 target slots so verify you have enough drives to justify the capacity. Target drives must use a SATA interface; other interfaces are not supported. Power requires an AC supply between 115 and 230 V at 50 or 60 Hz. No host connection is needed but ensure physical space for the standalone tower.

Přednosti

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Specifikace

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH23HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 23
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the Athena Controller or LCD need servicing down the line?

The Athena Controller and 16 x 2 LCD are solid-state components with no moving parts, so no routine servicing is expected.

What limits continuous duplication speed across all 23 targets?

The 150 MB/s transfer rate per slot is the fixed ceiling; total aggregate throughput scales with the number of active targets.

How much fan noise and heat should I expect during all-day runs?

The unit draws 115-230 V AC at 50/60 Hz; normal office ambient conditions keep it within thermal limits without excessive noise.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.