Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H09PROHEB 1-to-9 SATA duplicator

SKU CH-NNFN-PM012

Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 9

Data Transfer Rate 300MB/s

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Target drive count and use case

The EZ Dupe HD Leopardo H09PROHEB is a standalone SATA duplicator that copies one source drive to as many as nine target drives simultaneously. It is built for IT departments, data-recovery labs and forensic teams that need to replicate or sanitise 2.5-inch and 3.5-inch SATA hard drives or solid-state drives without attaching a host computer.

Copy and erase speed limits

Each target slot sustains up to 300 MB per second, equivalent to 18 GB per minute, driven by the Athena controller and 128 MB of buffer memory. Four copy modes include quick file-level duplication, full media imaging, partition-only copy and percentage-based range copy. Seven erase modes cover quick and full erasure, DoD 3-pass and 7-pass to the 5220.22 standard, secure erase, enhanced SSD erase and HPA removal.

Power and physical checks before ordering

The unit operates on AC 115 to 230 V at 50 or 60 Hz and uses a slot-load mechanism that accepts both 2.5-inch and 3.5-inch SATA drives without adapters. Verify that your drives use the SATA interface, that you have space for the desktop chassis, and that the 16 by 2 LCD and status LEDs are visible in your working environment.

Přednosti

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Specifikace

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH09PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose the 1-to-9 target version for my batch workloads?

The 1-to-9 target lets you duplicate up to nine SATA drives simultaneously, with each slot sustaining the full 300 MB/s rate.

What does the 300 MB/s headline figure mean once the duplicator is running?

Each of the nine target slots can write at up to 300 MB/s, so a full 18 GB of data transfers every minute per drive.

The SATA interface caps at 300 MB/s — what does that limit in practice?

The SATA connector and Athena controller deliver 300 MB/s per slot, so copy and erase speeds are bound by that throughput ceiling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.