نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone duplicator with 16x2 LCD and nine SATA slots

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H09PROHEB 1-to-9 SATA duplicator

SKU CH-NNFN-PM012

Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 9

Target 1 to 9

Data Transfer Rate 300MB/s

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Target drive count and use case

The EZ Dupe HD Leopardo H09PROHEB is a standalone SATA duplicator that copies one source drive to as many as nine target drives simultaneously. It is built for IT departments, data-recovery labs and forensic teams that need to replicate or sanitise 2.5-inch and 3.5-inch SATA hard drives or solid-state drives without attaching a host computer.

Copy and erase speed limits

Each target slot sustains up to 300 MB per second, equivalent to 18 GB per minute, driven by the Athena controller and 128 MB of buffer memory. Four copy modes include quick file-level duplication, full media imaging, partition-only copy and percentage-based range copy. Seven erase modes cover quick and full erasure, DoD 3-pass and 7-pass to the 5220.22 standard, secure erase, enhanced SSD erase and HPA removal.

Power and physical checks before ordering

The unit operates on AC 115 to 230 V at 50 or 60 Hz and uses a slot-load mechanism that accepts both 2.5-inch and 3.5-inch SATA drives without adapters. Verify that your drives use the SATA interface, that you have space for the desktop chassis, and that the 16 by 2 LCD and status LEDs are visible in your working environment.

أبرز المميزات

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

المواصفات

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH09PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I choose the 1-to-9 target version for my batch workloads?

The 1-to-9 target lets you duplicate up to nine SATA drives simultaneously, with each slot sustaining the full 300 MB/s rate.

What does the 300 MB/s headline figure mean once the duplicator is running?

Each of the nine target slots can write at up to 300 MB/s, so a full 18 GB of data transfers every minute per drive.

The SATA interface caps at 300 MB/s — what does that limit in practice?

The SATA connector and Athena controller deliver 300 MB/s per slot, so copy and erase speeds are bound by that throughput ceiling.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.