暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator with 16x2 LCD and nine SATA slots

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H09PROHEB 1-to-9 SATA duplicator

SKU CH-NNFN-PM012

Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 9

Target 1 to 9

Data Transfer Rate 300MB/s

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Target drive count and use case

The EZ Dupe HD Leopardo H09PROHEB is a standalone SATA duplicator that copies one source drive to as many as nine target drives simultaneously. It is built for IT departments, data-recovery labs and forensic teams that need to replicate or sanitise 2.5-inch and 3.5-inch SATA hard drives or solid-state drives without attaching a host computer.

Copy and erase speed limits

Each target slot sustains up to 300 MB per second, equivalent to 18 GB per minute, driven by the Athena controller and 128 MB of buffer memory. Four copy modes include quick file-level duplication, full media imaging, partition-only copy and percentage-based range copy. Seven erase modes cover quick and full erasure, DoD 3-pass and 7-pass to the 5220.22 standard, secure erase, enhanced SSD erase and HPA removal.

Power and physical checks before ordering

The unit operates on AC 115 to 230 V at 50 or 60 Hz and uses a slot-load mechanism that accepts both 2.5-inch and 3.5-inch SATA drives without adapters. Verify that your drives use the SATA interface, that you have space for the desktop chassis, and that the 16 by 2 LCD and status LEDs are visible in your working environment.

特長

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

仕様

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH09PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 1-to-9 target version for my batch workloads?

The 1-to-9 target lets you duplicate up to nine SATA drives simultaneously, with each slot sustaining the full 300 MB/s rate.

What does the 300 MB/s headline figure mean once the duplicator is running?

Each of the nine target slots can write at up to 300 MB/s, so a full 18 GB of data transfers every minute per drive.

The SATA interface caps at 300 MB/s — what does that limit in practice?

The SATA connector and Athena controller deliver 300 MB/s per slot, so copy and erase speeds are bound by that throughput ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。