暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SATA duplicator with 16x2 LCD and five drive slots

EZ Dupe, Inc.

EZ Dupe HD Leopardo H05PROHEB 1-to-5 SATA Duplicator 300MB/s

SKU CH-RMCH-GRGYZ

Standalone duplicator copies up to 5 SATA drives at 300 MB/s with 4 copy and 7 erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 5

Target 1 to 5

Data Transfer Rate 300MB/s

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies five SATA drives simultaneously at 300 MB/s
  • Four copy modes cover quick, full, partition and percentage duplication
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Standalone operation with 16×2 LCD needs no host computer
  • Accepts 2.5" and 3.5" SATA drives without adapters

Standalone SATA Duplicator

The EZ Dupe HD Leopardo H05PROHEB is a standalone duplicator that copies one SATA source drive to up to five target drives at 300 MB/s. It operates without a host computer and includes a 16 x 2 LCD with indication lights for status feedback. The unit accepts both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives directly in its slot-load bays.

IT Shops and Data-Centre Teams

This duplicator suits IT departments and service providers who need to clone or sanitise multiple SATA drives in a secure, offline environment. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard cover compliance requirements. Buyers who need to duplicate more than five drives simultaneously or who require support for drive interfaces other than SATA should consider alternative equipment.

Five-Target Capacity

The single specification that determines fit is the 1-to-5 target count: one source slot plus five destination slots per copy cycle. If your workflow regularly demands six or more concurrent targets, this unit will not meet that throughput requirement.

特長

  • Copies five SATA drives simultaneously at 300 MB/s
  • Four copy modes cover quick, full, partition and percentage duplication
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Standalone operation with 16×2 LCD needs no host computer
  • Accepts 2.5" and 3.5" SATA drives without adapters

仕様

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH05PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 5
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What drives do I need to populate the five target slots on the H05PROHEB?

The duplicator accepts up to five 2.5" or 3.5" SATA hard drives or solid-state drives without any adapter.

Can I keep using my existing 3.5" SATA drives with this duplicator?

Yes, the unit supports both 3.5" and 2.5" SATA drives natively, so your current 3.5" drives will work directly in the slots.

How do I confirm the H05PROHEB is copying at the rated 300MB/s?

The 16 x 2 LCD shows real-time copy progress and speed; watch the displayed transfer rate during a duplication job to verify performance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。