暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator with 16 x 2 LCD and SATA slot

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H01PROHEB 1-to-1 SATA duplicator

SKU CH-04EZ-3AAVY

Standalone duplicator copies one SATA 2.5" or 3.5" drive to another at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 1

Target 1 to 1

Data Transfer Rate 300MB/s

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation with no host computer required
  • Copies one SATA drive at 300 MB/s or 18 GB/min
  • Four copy modes including quick and full duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • 16×2 LCD with indicator lights for status monitoring

1-to-1 SATA duplicator for IT professionals

The EZ Dupe HD Leopardo H01PROHEB copies a single SATA 3.5 or 2.5 drive to one target at up to 300 MB/s. It operates standalone with a 16 x 2 LCD and Athena controller, so no host computer is required. Four copy modes handle quick file replication, full media imaging, partition-only transfers and percentage-based ranges.

Standalone operation with slot loading

Insert source and target drives into the top-loading slots and select a mode from the LCD menu; no software installation or driver configuration is needed. The 128 MB buffer sustains the 18 GB/min throughput. Errors appear on the display if a drive is not seated correctly or if the source exceeds the target capacity.

Verify drive format and power before ordering

Both drives must use the SATA interface and fit 2.5 or 3.5 form factors; other interfaces are not supported. The unit accepts AC input from 115 to 230 V at 50 or 60 Hz, so confirm local mains compatibility. Ensure the target drive capacity equals or exceeds the source data you intend to copy.

特長

  • Standalone operation with no host computer required
  • Copies one SATA drive at 300 MB/s or 18 GB/min
  • Four copy modes including quick and full duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • 16×2 LCD with indicator lights for status monitoring

仕様

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH01PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 1
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How can I confirm the duplicator is copying correctly after I start a job?

Watch the 16 x 2 LCD for progress percentage and the indication lights for slot activity; the Athena Controller reports completion when the chosen copy mode finishes.

What comes in the box and what must I provide separately?

The unit includes the duplicator with its AC power supply (115-230 V, 50/60 Hz); you supply the 2.5" or 3.5" SATA drives to be duplicated or erased.

Which copy mode should I choose for a straight sector-by-sector clone?

Select Whole HDD (Full Copy) mode to duplicate the entire source drive including unoccupied space for an exact sector-level replica.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。