暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H03PROHEB 1-to-3 SATA duplicator

SKU CH-CM04-B2JV1

Standalone duplicator copies up to three SATA drives at 300 MB/s with four copy modes and seven erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 3

Data Transfer Rate 300MB/s

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copy three SATA drives simultaneously at 300 MB/s per slot
  • Four duplication modes including quick and full copy options
  • Seven erase modes meeting DoD 5220.22-M security standards
  • Standalone operation with 16×2 LCD — no host computer required
  • Supports 2.5" and 3.5" SATA drives without adapters

Duplicator for three SATA drives

The HD Leopardo H03PROHEB is a standalone duplicator that copies one SATA source drive to up to three target drives simultaneously. It accepts both 3.5 and 2.5 inch SATA hard drives and solid state drives without adapters. The unit operates without a host computer, software or network connection. A 16 x 2 LCD panel and indicator lights show job progress and status.

Upgrade from single-bay copiers

Moving from a one-to-one duplicator to this 1-to-3 model triples per-session throughput when you regularly clone the same image to multiple drives. The jump is worth it when production batches exceed a single target or when you need the seven erase modes — including DoD 3-pass and 7-pass to 5220.22-M standards — for compliant sanitisation. Copy speed reaches 300MB per second, or 18GB per minute, across each slot.

Check power and drive fit

Verify that your mains supply delivers 115 to 230 V at 50 or 60 Hz, matching the built-in AC input. Confirm that every source and target drive uses a SATA interface and fits the 3.5 or 2.5 inch form factor; other interfaces or sizes are not supported. The slot-load design requires no caddies, but drives must be inserted directly into the three target bays and one source bay.

特長

  • Copy three SATA drives simultaneously at 300 MB/s per slot
  • Four duplication modes including quick and full copy options
  • Seven erase modes meeting DoD 5220.22-M security standards
  • Standalone operation with 16×2 LCD — no host computer required
  • Supports 2.5" and 3.5" SATA drives without adapters

仕様

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH03PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 3
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator accept both 2.5" and 3.5" SATA drives without an adapter?

Yes, the HD Leopardo H03PROHEB supports 2.5" and 3.5" SATA hard drives and solid-state drives directly in each of the three target slots, no adapter required.

How do I start a copy job on the standalone unit, and what is the common mistake?

Insert the source drive into the source slot and up to three target drives into the target slots, select one of the four copy modes via the 16x2 LCD menu, then press Start; the frequent error is choosing Quick Copy when the file system is unrecognised, which copies nothing — use Whole Media or Percentage Copy instead.

Which erase mode should I choose for a drive that will be reused internally, and does the unit need servicing?

For internal reuse, Quick Erase removes file references in seconds; the duplicator has no user-serviceable parts and requires no periodic maintenance beyond keeping the slots clear of dust.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。