Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black standalone duplicator with 16 x 2 LCD and SATA slot

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H01PROHEB 1-to-1 SATA duplicator

SKU CH-04EZ-3AAVY

Standalone duplicator copies one SATA 2.5" or 3.5" drive to another at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 1

Target 1 to 1

Data Transfer Rate 300MB/s

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Standalone operation with no host computer required
  • Copies one SATA drive at 300 MB/s or 18 GB/min
  • Four copy modes including quick and full duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • 16×2 LCD with indicator lights for status monitoring

1-to-1 SATA duplicator for IT professionals

The EZ Dupe HD Leopardo H01PROHEB copies a single SATA 3.5 or 2.5 drive to one target at up to 300 MB/s. It operates standalone with a 16 x 2 LCD and Athena controller, so no host computer is required. Four copy modes handle quick file replication, full media imaging, partition-only transfers and percentage-based ranges.

Standalone operation with slot loading

Insert source and target drives into the top-loading slots and select a mode from the LCD menu; no software installation or driver configuration is needed. The 128 MB buffer sustains the 18 GB/min throughput. Errors appear on the display if a drive is not seated correctly or if the source exceeds the target capacity.

Verify drive format and power before ordering

Both drives must use the SATA interface and fit 2.5 or 3.5 form factors; other interfaces are not supported. The unit accepts AC input from 115 to 230 V at 50 or 60 Hz, so confirm local mains compatibility. Ensure the target drive capacity equals or exceeds the source data you intend to copy.

Privalumai

  • Standalone operation with no host computer required
  • Copies one SATA drive at 300 MB/s or 18 GB/min
  • Four copy modes including quick and full duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • 16×2 LCD with indicator lights for status monitoring

Specifikacijos

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH01PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 1
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How can I confirm the duplicator is copying correctly after I start a job?

Watch the 16 x 2 LCD for progress percentage and the indication lights for slot activity; the Athena Controller reports completion when the chosen copy mode finishes.

What comes in the box and what must I provide separately?

The unit includes the duplicator with its AC power supply (115-230 V, 50/60 Hz); you supply the 2.5" or 3.5" SATA drives to be duplicated or erased.

Which copy mode should I choose for a straight sector-by-sector clone?

Select Whole HDD (Full Copy) mode to duplicate the entire source drive including unoccupied space for an exact sector-level replica.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.