EZ Dupe, Inc. H03HSATB 1-to-3 SATA duplicator
- Hard Drive Duplicat…
- Black
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
EZ Dupe, Inc.
Standalone duplicator copies up to 5 SATA drives at 300 MB/s with 4 copy and 7 erase modes
Data Transfer Rate 300MB/s
Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.
The EZ Dupe HD Leopardo H05PROHEB is a standalone duplicator that copies one SATA source drive to up to five target drives at 300 MB/s. It operates without a host computer and includes a 16 x 2 LCD with indication lights for status feedback. The unit accepts both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives directly in its slot-load bays.
This duplicator suits IT departments and service providers who need to clone or sanitise multiple SATA drives in a secure, offline environment. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard cover compliance requirements. Buyers who need to duplicate more than five drives simultaneously or who require support for drive interfaces other than SATA should consider alternative equipment.
The single specification that determines fit is the 1-to-5 target count: one source slot plus five destination slots per copy cycle. If your workflow regularly demands six or more concurrent targets, this unit will not meet that throughput requirement.
| Brand | EZ Dupe |
|---|---|
| Type | Hard Drive Duplicator |
| Model | HD Leopardo |
| Part Number | H05PROHEB |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 5 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The duplicator accepts up to five 2.5" or 3.5" SATA hard drives or solid-state drives without any adapter.
Yes, the unit supports both 3.5" and 2.5" SATA drives natively, so your current 3.5" drives will work directly in the slots.
The 16 x 2 LCD shows real-time copy progress and speed; watch the displayed transfer rate during a duplication job to verify performance.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?