Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone SATA duplicator with 16x2 LCD and five drive slots

EZ Dupe, Inc.

EZ Dupe HD Leopardo H05PROHEB 1-to-5 SATA Duplicator 300MB/s

SKU CH-RMCH-GRGYZ

Standalone duplicator copies up to 5 SATA drives at 300 MB/s with 4 copy and 7 erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 5

Target 1 to 5

Data Transfer Rate 300MB/s

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copies five SATA drives simultaneously at 300 MB/s
  • Four copy modes cover quick, full, partition and percentage duplication
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Standalone operation with 16×2 LCD needs no host computer
  • Accepts 2.5" and 3.5" SATA drives without adapters

Standalone SATA Duplicator

The EZ Dupe HD Leopardo H05PROHEB is a standalone duplicator that copies one SATA source drive to up to five target drives at 300 MB/s. It operates without a host computer and includes a 16 x 2 LCD with indication lights for status feedback. The unit accepts both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives directly in its slot-load bays.

IT Shops and Data-Centre Teams

This duplicator suits IT departments and service providers who need to clone or sanitise multiple SATA drives in a secure, offline environment. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard cover compliance requirements. Buyers who need to duplicate more than five drives simultaneously or who require support for drive interfaces other than SATA should consider alternative equipment.

Five-Target Capacity

The single specification that determines fit is the 1-to-5 target count: one source slot plus five destination slots per copy cycle. If your workflow regularly demands six or more concurrent targets, this unit will not meet that throughput requirement.

Přednosti

  • Copies five SATA drives simultaneously at 300 MB/s
  • Four copy modes cover quick, full, partition and percentage duplication
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Standalone operation with 16×2 LCD needs no host computer
  • Accepts 2.5" and 3.5" SATA drives without adapters

Specifikace

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH05PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 5
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What drives do I need to populate the five target slots on the H05PROHEB?

The duplicator accepts up to five 2.5" or 3.5" SATA hard drives or solid-state drives without any adapter.

Can I keep using my existing 3.5" SATA drives with this duplicator?

Yes, the unit supports both 3.5" and 2.5" SATA drives natively, so your current 3.5" drives will work directly in the slots.

How do I confirm the H05PROHEB is copying at the rated 300MB/s?

The 16 x 2 LCD shows real-time copy progress and speed; watch the displayed transfer rate during a duplication job to verify performance.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.