EZ Dupe, Inc. H03HSATB 1-to-3 SATA duplicator
- Hard Drive Duplicat…
- Black
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
EZ Dupe, Inc.
Standalone duplicator copies up to 5 SATA drives at 300 MB/s with 4 copy and 7 erase modes
Data Transfer Rate 300MB/s
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
The EZ Dupe HD Leopardo H05PROHEB is a standalone duplicator that copies one SATA source drive to up to five target drives at 300 MB/s. It operates without a host computer and includes a 16 x 2 LCD with indication lights for status feedback. The unit accepts both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives directly in its slot-load bays.
This duplicator suits IT departments and service providers who need to clone or sanitise multiple SATA drives in a secure, offline environment. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard cover compliance requirements. Buyers who need to duplicate more than five drives simultaneously or who require support for drive interfaces other than SATA should consider alternative equipment.
The single specification that determines fit is the 1-to-5 target count: one source slot plus five destination slots per copy cycle. If your workflow regularly demands six or more concurrent targets, this unit will not meet that throughput requirement.
| Brand | EZ Dupe |
|---|---|
| Type | Hard Drive Duplicator |
| Model | HD Leopardo |
| Part Number | H05PROHEB |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 5 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The duplicator accepts up to five 2.5" or 3.5" SATA hard drives or solid-state drives without any adapter.
Yes, the unit supports both 3.5" and 2.5" SATA drives natively, so your current 3.5" drives will work directly in the slots.
The 16 x 2 LCD shows real-time copy progress and speed; watch the displayed transfer rate during a duplication job to verify performance.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?