我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone duplicator with 16x2 LCD and nine SATA slots

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H09PROHEB 1-to-9 SATA duplicator

SKU CH-NNFN-PM012

Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 9

Target 1 to 9

Data Transfer Rate 300MB/s

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Target drive count and use case

The EZ Dupe HD Leopardo H09PROHEB is a standalone SATA duplicator that copies one source drive to as many as nine target drives simultaneously. It is built for IT departments, data-recovery labs and forensic teams that need to replicate or sanitise 2.5-inch and 3.5-inch SATA hard drives or solid-state drives without attaching a host computer.

Copy and erase speed limits

Each target slot sustains up to 300 MB per second, equivalent to 18 GB per minute, driven by the Athena controller and 128 MB of buffer memory. Four copy modes include quick file-level duplication, full media imaging, partition-only copy and percentage-based range copy. Seven erase modes cover quick and full erasure, DoD 3-pass and 7-pass to the 5220.22 standard, secure erase, enhanced SSD erase and HPA removal.

Power and physical checks before ordering

The unit operates on AC 115 to 230 V at 50 or 60 Hz and uses a slot-load mechanism that accepts both 2.5-inch and 3.5-inch SATA drives without adapters. Verify that your drives use the SATA interface, that you have space for the desktop chassis, and that the 16 by 2 LCD and status LEDs are visible in your working environment.

商品特色

  • Copy 9 drives simultaneously at 300 MB/s per slot
  • Four copy modes including quick and full duplication
  • Seven erase modes meeting DoD 5220.22-M standards
  • Standalone operation with 16×2 LCD, no host PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

商品規格

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH09PROHEB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 9
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I choose the 1-to-9 target version for my batch workloads?

The 1-to-9 target lets you duplicate up to nine SATA drives simultaneously, with each slot sustaining the full 300 MB/s rate.

What does the 300 MB/s headline figure mean once the duplicator is running?

Each of the nine target slots can write at up to 300 MB/s, so a full 18 GB of data transfers every minute per drive.

The SATA interface caps at 300 MB/s — what does that limit in practice?

The SATA connector and Athena controller deliver 300 MB/s per slot, so copy and erase speeds are bound by that throughput ceiling.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。