EZ Dupe H09HSATB 1-to-9 SATA duplicator
- Hard Drive Duplicat…
- Black
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Standalone duplicator copies up to 9 SATA 3.5" or 2.5" drives at 300 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards
Data Transfer Rate 300MB/s
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The EZ Dupe HD Leopardo H09PROHEB is a standalone SATA duplicator that copies one source drive to as many as nine target drives simultaneously. It is built for IT departments, data-recovery labs and forensic teams that need to replicate or sanitise 2.5-inch and 3.5-inch SATA hard drives or solid-state drives without attaching a host computer.
Each target slot sustains up to 300 MB per second, equivalent to 18 GB per minute, driven by the Athena controller and 128 MB of buffer memory. Four copy modes include quick file-level duplication, full media imaging, partition-only copy and percentage-based range copy. Seven erase modes cover quick and full erasure, DoD 3-pass and 7-pass to the 5220.22 standard, secure erase, enhanced SSD erase and HPA removal.
The unit operates on AC 115 to 230 V at 50 or 60 Hz and uses a slot-load mechanism that accepts both 2.5-inch and 3.5-inch SATA drives without adapters. Verify that your drives use the SATA interface, that you have space for the desktop chassis, and that the 16 by 2 LCD and status LEDs are visible in your working environment.
| Brand | EZ Dupe |
|---|---|
| Type | Hard Drive Duplicator |
| Model | HD Leopardo |
| Part Number | H09PROHEB |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 9 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 1-to-9 target lets you duplicate up to nine SATA drives simultaneously, with each slot sustaining the full 300 MB/s rate.
Each of the nine target slots can write at up to 300 MB/s, so a full 18 GB of data transfers every minute per drive.
The SATA connector and Athena controller deliver 300 MB/s per slot, so copy and erase speeds are bound by that throughput ceiling.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?