暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator with fifteen SATA slots and a 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H15HSATB duplicator 15-target 150MB/s SATA 128M buffer

SKU CH-0FNK-Y327S

Standalone duplicator copies up to 15 SATA 3.5" or 2.5" drives at 150 MB/s with 128 MB buffer and DoD erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 15 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes include quick, full, partition and percentage options
  • Four erase modes cover quick, full, DoD 3-pass and DoD 7-pass standards
  • Standalone operation with 16×2 LCD needs no host PC for security
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

What this duplicator does

The EZ Dupe H15HSATB is a standalone hard-drive duplicator that copies up to 15 SATA drives at once. It handles both 3.5-inch and 2.5-inch SATA hard-disk drives and solid-state drives without adapters. A 128 MB buffer and Athena controller deliver a sustained 150 MB/s per slot. Operation is driven by a 16 x 2 LCD and status lights.

Who should use it and who should not

IT teams and data-centre staff needing fast, secure mass duplication or sanitisation of SATA drives will benefit from the four copy modes and four DoD-compliant erase modes. Buyers who need to duplicate drives with interfaces other than SATA, or who require network-attached or software-driven operation, should look at a different solution.

The specification that decides fit

The duplicator provides 15 target slots with a native SATA connector for each slot and a slot-load mechanism. If the workflow demands more than 15 simultaneous targets or a different drive interface, this unit will not meet the requirement.

特長

  • Copies up to 15 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes include quick, full, partition and percentage options
  • Four erase modes cover quick, full, DoD 3-pass and DoD 7-pass standards
  • Standalone operation with 16×2 LCD needs no host PC for security
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

仕様

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH15HSATB
Part NumberH15HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 15-target model or a smaller duplicator for my workload?

This unit has 15 target slots, so you can duplicate up to fifteen SATA drives at once; pick it if you regularly need that many concurrent copies.

What does the 150 MB/s headline speed mean once the duplicator is running?

The 150 MB/s rate is the maximum per-slot throughput; actual time depends on the source drive's sustained read performance.

The unit uses SATA — what does that cap in practice?

The SATA connectors limit you to 3.5" or 2.5" SATA hard drives and solid-state drives; other interfaces are not supported.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。