Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black standalone duplicator with fifteen SATA slots and a 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H15HSATB duplicator 15-target 150MB/s SATA 128M buffer

SKU CH-0FNK-Y327S

Standalone duplicator copies up to 15 SATA 3.5" or 2.5" drives at 150 MB/s with 128 MB buffer and DoD erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

Genomstrukna varianter finns, men är inte i lager här.

  • Copies up to 15 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes include quick, full, partition and percentage options
  • Four erase modes cover quick, full, DoD 3-pass and DoD 7-pass standards
  • Standalone operation with 16×2 LCD needs no host PC for security
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

What this duplicator does

The EZ Dupe H15HSATB is a standalone hard-drive duplicator that copies up to 15 SATA drives at once. It handles both 3.5-inch and 2.5-inch SATA hard-disk drives and solid-state drives without adapters. A 128 MB buffer and Athena controller deliver a sustained 150 MB/s per slot. Operation is driven by a 16 x 2 LCD and status lights.

Who should use it and who should not

IT teams and data-centre staff needing fast, secure mass duplication or sanitisation of SATA drives will benefit from the four copy modes and four DoD-compliant erase modes. Buyers who need to duplicate drives with interfaces other than SATA, or who require network-attached or software-driven operation, should look at a different solution.

The specification that decides fit

The duplicator provides 15 target slots with a native SATA connector for each slot and a slot-load mechanism. If the workflow demands more than 15 simultaneous targets or a different drive interface, this unit will not meet the requirement.

I korthet

  • Copies up to 15 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes include quick, full, partition and percentage options
  • Four erase modes cover quick, full, DoD 3-pass and DoD 7-pass standards
  • Standalone operation with 16×2 LCD needs no host PC for security
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

Specifikationer

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH15HSATB
Part NumberH15HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose the 15-target model or a smaller duplicator for my workload?

This unit has 15 target slots, so you can duplicate up to fifteen SATA drives at once; pick it if you regularly need that many concurrent copies.

What does the 150 MB/s headline speed mean once the duplicator is running?

The 150 MB/s rate is the maximum per-slot throughput; actual time depends on the source drive's sustained read performance.

The unit uses SATA — what does that cap in practice?

The SATA connectors limit you to 3.5" or 2.5" SATA hard drives and solid-state drives; other interfaces are not supported.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.