EZ Dupe, Inc. HD Leopardo H09PROHEB 1-to-9 SATA duplicator
- Hard Drive Duplicat…
- Black
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
EZ Dupe, Inc.
Standalone duplicator copies up to 15 SATA drives at 300 MB/s with 128 MB buffer and seven erase modes including DoD 5220.22-M
Data Transfer Rate 300MB/s
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The EZ Dupe HD Leopardo H15PROHEB is a standalone duplicator that copies up to fifteen SATA hard drives or solid-state drives simultaneously. It operates without a host computer and reaches a sustained 300 MB/s per slot. A 16 x 2 LCD panel and indicator lights show job progress and drive status.
This unit suits departments that need high-throughput cloning or secure erasure of 2.5" and 3.5" SATA media. Four copy modes and seven erase modes, including DoD 3-pass and 7-pass standards, cover forensic and compliance workflows. Buyers who need to duplicate drives with interfaces other than SATA, or who require fewer than two target bays, should consider other equipment.
The duplicator delivers up to 300 MB/s (18 GB/min) to each of the fifteen target ports. This throughput determines whether the device meets your cloning window or sanitisation schedule.
| Brand | EZ Dupe |
|---|---|
| Type | Hard Drive Duplicator |
| Model | HD Leopardo |
| Part Number | H15PROHEB |
| Panel Color | Black |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 15 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 16 x 2 LCD shows pass or fail status for each of the 15 target slots after every operation, and the indication lights give a quick visual confirmation.
The unit includes the duplicator with Athena Controller, 128M buffer, AC power supply for 115-230 V at 50/60 Hz, and 15 SATA slots; you provide the 2.5 or 3.5 SATA drives to duplicate.
Use Whole HDD (Full Copy) for a complete sector-by-sector clone at up to 300MB/s, or System and Files (Quick Copy) to copy only occupied space and save time.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟