Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black desktop duplicator with fifteen SATA slots and a 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. HD Leopardo H15PROHEB duplicator 15-target SATA 300MB/s 128M buffer

SKU CH-GHNP-XKWAK

Standalone duplicator copies up to 15 SATA drives at 300 MB/s with 128 MB buffer and seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15
  • Buffer Memory128M

Target 1 to 15

Data Transfer Rate 300MB/s

Зачертаните версии съществуват, но не се предлагат тук.

  • Copies 15 drives simultaneously at 300MB/s
  • Four copy modes including quick and full duplication
  • Seven erase modes with DoD 5220.22 compliance
  • Standalone operation requires no host computer
  • Supports 2.5 and 3.5 SATA drives without adapters

15-Target SATA Duplicator

The EZ Dupe HD Leopardo H15PROHEB is a standalone duplicator that copies up to fifteen SATA hard drives or solid-state drives simultaneously. It operates without a host computer and reaches a sustained 300 MB/s per slot. A 16 x 2 LCD panel and indicator lights show job progress and drive status.

IT Operations & Data Sanitisation Teams

This unit suits departments that need high-throughput cloning or secure erasure of 2.5" and 3.5" SATA media. Four copy modes and seven erase modes, including DoD 3-pass and 7-pass standards, cover forensic and compliance workflows. Buyers who need to duplicate drives with interfaces other than SATA, or who require fewer than two target bays, should consider other equipment.

300 MB/s SATA Transfer Rate

The duplicator delivers up to 300 MB/s (18 GB/min) to each of the fifteen target ports. This throughput determines whether the device meets your cloning window or sanitisation schedule.

Акценти

  • Copies 15 drives simultaneously at 300MB/s
  • Four copy modes including quick and full duplication
  • Seven erase modes with DoD 5220.22 compliance
  • Standalone operation requires no host computer
  • Supports 2.5 and 3.5 SATA drives without adapters

Спецификации

BrandEZ Dupe
TypeHard Drive Duplicator
ModelHD Leopardo
Part NumberH15PROHEB
Panel ColorBlack
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How do I verify the duplicator copied all 15 drives correctly?

The 16 x 2 LCD shows pass or fail status for each of the 15 target slots after every operation, and the indication lights give a quick visual confirmation.

What comes in the box and what must I supply myself?

The unit includes the duplicator with Athena Controller, 128M buffer, AC power supply for 115-230 V at 50/60 Hz, and 15 SATA slots; you provide the 2.5 or 3.5 SATA drives to duplicate.

Which copy mode should I choose for a bit-for-bit clone versus a faster file-level copy?

Use Whole HDD (Full Copy) for a complete sector-by-sector clone at up to 300MB/s, or System and Files (Quick Copy) to copy only occupied space and save time.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.