Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black standalone duplicator with 23 SATA slots and 16 x 2 LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H23HSATB 1-to-23 SATA Duplicator 150MB/s

SKU CH-YYP9-YS5XM

Standalone SATA duplicator copies up to 23 drives at 150 MB/s with four copy and four erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 23

Target 1 to 23

Data Transfer Rate 150MB/s

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

1-to-23 SATA Duplicator for High-Volume Tasks

The EZ Dupe H23HSATB duplicates one SATA source drive to up to 23 target drives simultaneously. It handles both 3.5 inch and 2.5 inch SATA hard drives and solid-state drives without adapters. A 128M buffer and Athena Controller manage the 150MB/s transfer rate. Standalone operation requires no host computer or software.

Four Copy Modes and Four Erase Standards

Quick Copy transfers only system and file data while Whole Media copies every sector including empty space. All Partitioned Copy and Percentage Copy let you define specific ranges. Erase options include Quick Erase, Full Erase, DoD 3-pass and DoD 7-pass compliant with 5220.22-M standards. A 16 x 2 LCD and indication lights show real-time progress.

Check Drive Counts and Power Input Before Ordering

The unit provides 23 target slots so verify you have enough drives to justify the capacity. Target drives must use a SATA interface; other interfaces are not supported. Power requires an AC supply between 115 and 230 V at 50 or 60 Hz. No host connection is needed but ensure physical space for the standalone tower.

Istaknuto

  • Copy 23 SATA drives simultaneously at 150MB/s per slot
  • Four copy modes including quick and full duplication options
  • Four erase modes with DoD 5220.22-M compliant sanitisation
  • Standalone operation with 16×2 LCD — no PC required
  • Supports 2.5" and 3.5" SATA drives without adapters

Specifikacije

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH23HSATB
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 23
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the Athena Controller or LCD need servicing down the line?

The Athena Controller and 16 x 2 LCD are solid-state components with no moving parts, so no routine servicing is expected.

What limits continuous duplication speed across all 23 targets?

The 150 MB/s transfer rate per slot is the fixed ceiling; total aggregate throughput scales with the number of active targets.

How much fan noise and heat should I expect during all-day runs?

The unit draws 115-230 V AC at 50/60 Hz; normal office ambient conditions keep it within thermal limits without excessive noise.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.