Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular black metal chassis with seven vertical SATA slots and a small LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H07HSATB 1-to-7 SATA Duplicator 150MB/s 128M buffer

SKU CH-DRQE-ZAVCR

Standalone duplicator copies up to 7 SATA drives at 150 MB/s with 128 MB buffer and DoD erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate150MB/s

Target 1 to 7

Data Transfer Rate 150MB/s

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

1-to-7 SATA Duplicator

The EZ Dupe H07HSATB duplicates up to seven SATA 3.5-inch or 2.5-inch drives simultaneously without a host computer. It targets IT departments, forensic labs and media houses that need secure, standalone mass copying or sanitising of hard disks and solid-state drives.

150 MB/s throughput with 128 MB buffer

Each of the seven target ports sustains up to 150 MB per second, moving roughly 9 GB per minute per slot. The Athena controller and 128 MB buffer keep all channels fed during quick-copy, full-copy, partition-only or percentage-copy jobs, while four DoD-compliant erase modes (including 3-pass and 7-pass to 5220.22-M) handle sanitisation.

Standalone operation on 115-230 V AC

A 16 x 2 LCD and status LEDs drive the menu system so no software, PC or network link is required. The unit accepts 115 to 230 V at 50 or 60 Hz, loads drives through front slots without adapters, and frees up workstation resources while copying or wiping up to seven drives at once.

Istaknuto

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

Specifikacije

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH07HSATB
Part NumberH07HSATB
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the duplicator's 150MB/s copy speed saturate my older 3.5" SATA drives?

The unit copies up to seven SATA 3.5" or 2.5" drives at 150MB/s per slot; older drives will simply run at their own maximum rate.

How do I confirm the duplicator is copying correctly on the 16 x 2 LCD?

The display shows real-time progress, mode selection, and error status for each of the seven target slots during operation.

Does the box include drive caddies or just the bare slots for 2.5" and 3.5" SATA drives?

Drives insert directly into the slot-load bays without caddies; the package supplies the duplicator and an AC power cord for 115-230 V operation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.