Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Rectangular black metal chassis with seven vertical SATA slots and a small LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H07HSATB 1-to-7 SATA Duplicator 150MB/s 128M buffer

SKU CH-DRQE-ZAVCR

Standalone duplicator copies up to 7 SATA drives at 150 MB/s with 128 MB buffer and DoD erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate150MB/s

Target 1 to 7

Data Transfer Rate 150MB/s

Le versioni barrate esistono, ma non sono disponibili qui.

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

1-to-7 SATA Duplicator

The EZ Dupe H07HSATB duplicates up to seven SATA 3.5-inch or 2.5-inch drives simultaneously without a host computer. It targets IT departments, forensic labs and media houses that need secure, standalone mass copying or sanitising of hard disks and solid-state drives.

150 MB/s throughput with 128 MB buffer

Each of the seven target ports sustains up to 150 MB per second, moving roughly 9 GB per minute per slot. The Athena controller and 128 MB buffer keep all channels fed during quick-copy, full-copy, partition-only or percentage-copy jobs, while four DoD-compliant erase modes (including 3-pass and 7-pass to 5220.22-M) handle sanitisation.

Standalone operation on 115-230 V AC

A 16 x 2 LCD and status LEDs drive the menu system so no software, PC or network link is required. The unit accepts 115 to 230 V at 50 or 60 Hz, loads drives through front slots without adapters, and frees up workstation resources while copying or wiping up to seven drives at once.

Punti di forza

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

Caratteristiche tecniche

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH07HSATB
Part NumberH07HSATB
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the duplicator's 150MB/s copy speed saturate my older 3.5" SATA drives?

The unit copies up to seven SATA 3.5" or 2.5" drives at 150MB/s per slot; older drives will simply run at their own maximum rate.

How do I confirm the duplicator is copying correctly on the 16 x 2 LCD?

The display shows real-time progress, mode selection, and error status for each of the seven target slots during operation.

Does the box include drive caddies or just the bare slots for 2.5" and 3.5" SATA drives?

Drives insert directly into the slot-load bays without caddies; the package supplies the duplicator and an AC power cord for 115-230 V operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.