Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Rectangular black metal chassis with seven vertical SATA slots and a small LCD display

EZ Dupe, Inc.

EZ Dupe, Inc. H07HSATB 1-to-7 SATA Duplicator 150MB/s 128M buffer

SKU CH-DRQE-ZAVCR

Standalone duplicator copies up to 7 SATA drives at 150 MB/s with 128 MB buffer and DoD erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate150MB/s

Target 1 to 7

Data Transfer Rate 150MB/s

Overstrøkne versjoner finnes, men er ikke på lager her.

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

1-to-7 SATA Duplicator

The EZ Dupe H07HSATB duplicates up to seven SATA 3.5-inch or 2.5-inch drives simultaneously without a host computer. It targets IT departments, forensic labs and media houses that need secure, standalone mass copying or sanitising of hard disks and solid-state drives.

150 MB/s throughput with 128 MB buffer

Each of the seven target ports sustains up to 150 MB per second, moving roughly 9 GB per minute per slot. The Athena controller and 128 MB buffer keep all channels fed during quick-copy, full-copy, partition-only or percentage-copy jobs, while four DoD-compliant erase modes (including 3-pass and 7-pass to 5220.22-M) handle sanitisation.

Standalone operation on 115-230 V AC

A 16 x 2 LCD and status LEDs drive the menu system so no software, PC or network link is required. The unit accepts 115 to 230 V at 50 or 60 Hz, loads drives through front slots without adapters, and frees up workstation resources while copying or wiping up to seven drives at once.

Høydepunkter

  • Copies 7 drives simultaneously at 150MB/s
  • Four copy modes including quick and full duplication
  • Four erase modes up to DoD 7-pass standard
  • Standalone operation with 16×2 LCD and no host PC needed
  • 128 MB buffer supports 2.5" and 3.5" SATA drives

Spesifikasjoner

BrandEZ Dupe
TypeHard Drive Duplicator
ModelH07HSATB
Part NumberH07HSATB
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate150MB/s
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Load TypeSlot
Key FeaturesDuplication
FeaturesIndication Lights
Power SupplyAC: 115-230 V, 50/60 Hz

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the duplicator's 150MB/s copy speed saturate my older 3.5" SATA drives?

The unit copies up to seven SATA 3.5" or 2.5" drives at 150MB/s per slot; older drives will simply run at their own maximum rate.

How do I confirm the duplicator is copying correctly on the 16 x 2 LCD?

The display shows real-time progress, mode selection, and error status for each of the seven target slots during operation.

Does the box include drive caddies or just the bare slots for 2.5" and 3.5" SATA drives?

Drives insert directly into the slot-load bays without caddies; the package supplies the duplicator and an AC power cord for 115-230 V operation.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.