KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.
KingSpec
A 1 TB SATA M.2 2280 internal SSD delivering up to 570 MB/s read and 540 MB/s write speeds with 3D NAND and a 1,000,000-hour MTBF
Model NT-1TB-2280
The KingSpec NT-1TB-2280 is an internal solid-state drive in the M.2 2280 form factor with a 1TB capacity. It connects through the SATA III interface and uses 3D NAND memory components. The drive is designed for consumer desktops, laptops and ultrabooks that have an M.2 SATA slot.
This SSD suits systems with an M.2 slot wired for SATA signalling and a 2280-length bay. It delivers up to 570 MBps sequential read and 540 MBps sequential write with 58,800 IOPS random read and 62,500 IOPS random write. Builders whose platform only supports PCIe signalling cannot use this drive.
The single specification that decides fit is the SATA III interface on an M.2 2280 connector. The motherboard or laptop must provide a SATA-wired M.2 slot; a PCIe-only slot will not work. No other interface is supported by this model.
| Brand | KingSpec |
|---|---|
| Series | NT 2280 Series |
| Model | NT-1TB-2280 |
| Part Number | NT-1TB-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 570 MBps |
| Max Sequential Write | Up to 540 MBps |
| 4KB Random Read | Up to 58,800 IOPS |
| 4KB Random Write | Up to 62,500 IOPS |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 10% to 95% RH non-condensing |
| Height | 3.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Bu modelin diğer sürümleri
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Yes, the SATA III interface is backward compatible with SATA 3 Gbps ports, though sequential speeds will be limited to the older port's maximum throughput.
Run a benchmark tool such as CrystalDiskMark using a 1 GiB test file on an empty partition; results should approach the rated sequential figures.
A cooling sticker is included; a mounting screw is not supplied and must be sourced from the system manufacturer or a hardware kit.
Bu reyondan diğerleri
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Ödediğiniz koin ve fiyatları gördüğünüz para birimi.
Ödeme sırasında cüzdanınızdan gönderilir.
Yalnızca görüntüleme içindir — katalog USD cinsinden fiyatlandırılır.
Eşleşen para birimi yok.
Sitenin size hangi dilde hitap edeceğini seçin.
İlk kez mi geliyorsunuz?
Zaten hesabınız var mı?
Otomatik bir sıfırlama yoktur: bu mağaza hiç e-posta göndermez, dolayısıyla talep edilecek tek kullanımlık bir bağlantı da yoktur. Adresi hesapta bırakın, elle işleme alınır.
Talep alındı
Gelen kutunuza doğru giden hiçbir şey yok — bu mağaza hiç e-posta göndermez. Bunları biri elle işleme alır.
Hatırladınız mı?