KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
KingSpec
A 1 TB SATA M.2 2280 internal SSD delivering up to 570 MB/s read and 540 MB/s write speeds with 3D NAND and a 1,000,000-hour MTBF
Model NT-1TB-2280
The KingSpec NT-1TB-2280 is an internal solid-state drive in the M.2 2280 form factor with a 1TB capacity. It connects through the SATA III interface and uses 3D NAND memory components. The drive is designed for consumer desktops, laptops and ultrabooks that have an M.2 SATA slot.
This SSD suits systems with an M.2 slot wired for SATA signalling and a 2280-length bay. It delivers up to 570 MBps sequential read and 540 MBps sequential write with 58,800 IOPS random read and 62,500 IOPS random write. Builders whose platform only supports PCIe signalling cannot use this drive.
The single specification that decides fit is the SATA III interface on an M.2 2280 connector. The motherboard or laptop must provide a SATA-wired M.2 slot; a PCIe-only slot will not work. No other interface is supported by this model.
| Brand | KingSpec |
|---|---|
| Series | NT 2280 Series |
| Model | NT-1TB-2280 |
| Part Number | NT-1TB-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 570 MBps |
| Max Sequential Write | Up to 540 MBps |
| 4KB Random Read | Up to 58,800 IOPS |
| 4KB Random Write | Up to 62,500 IOPS |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 10% to 95% RH non-condensing |
| Height | 3.50mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 50g |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the SATA III interface is backward compatible with SATA 3 Gbps ports, though sequential speeds will be limited to the older port's maximum throughput.
Run a benchmark tool such as CrystalDiskMark using a 1 GiB test file on an empty partition; results should approach the rated sequential figures.
A cooling sticker is included; a mounting screw is not supplied and must be sourced from the system manufacturer or a hardware kit.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?