Lay Filaments
Lay Filaments BendLay 1.75mm 0.25kg 3D printer filament
Tough, nearly clear filament that bends without stress whitening and prints at 230–240 °C with ±0.1 mm tolerance
- Nearly clear prints from extremely translucent filament
- Bends without stress whitening for durable parts
- Safe for household, food and medical use
- Low moisture absorption reduces warping vs ABS
- Prints at 230-240 °C with ±0.1 mm tolerance
What BendLay filament is and who it suits
Lay Filaments BendLay is a modified butadiene filament designed for makers who need tough, nearly clear prints that stay bendable after cooling. It prints at 230-240 degC on any printer accepting 1.75 mm filament with ±0.1 mm tolerance. The 0.25 kg spool is ideal for small test parts, translucent prototypes or medical-device models where household and food safety matter. It is not for users who need large-volume spools for production runs or materials that withstand acetone smoothing.
Capacity and headroom: what it handles
The spool holds 0.25 kg of filament, enough for multiple small brackets, clear enclosures or flexible hinges without frequent changeovers. High interlayer adhesion gives strong, watertight walls even on thin features, and low moisture uptake reduces warping on unheated beds. The material softens above the 230-240 degC print window, so it cannot serve high-temperature structural parts or applications requiring acetone vapour polishing.
Thermals, noise and power draw in normal use
Printing at 230-240 degC keeps hot-end power demand moderate and within range of standard 24 V heater cartridges. No heated chamber is required, so enclosure fans and additional heating elements stay off, limiting system noise to the printer’s own motion mechanics. Low warping means fewer failed prints and less wasted machine time, indirectly reducing overall energy consumption per successful part.
Öne çıkanlar
- Nearly clear prints from extremely translucent filament
- Bends without stress whitening for durable parts
- Safe for household, food and medical use
- Low moisture absorption reduces warping vs ABS
- Prints at 230-240 °C with ±0.1 mm tolerance
Teknik özellikler
| Brand | Lay Filaments |
|---|
Bu ürünle ilgili sorular
Will the 1.75 mm diameter with ± 0.1 mm tolerance feed reliably through the Bowden tube on my older printer?
Yes, the 1.75 mm filament with ± 0.1 mm tolerance matches the standard size used by most Bowden and direct-drive extruders, so it will feed without modification.
How can I verify the BendLay is printing correctly at 230 - 240 °C on my machine?
Look for strong layer adhesion, a nearly clear translucent finish, and no stress whitening when the printed part is bent — these show the temperature is right.
Does the 0.25 kg spool include a desiccant pack or must I buy one separately for moisture control?
The spool contains only the BendLay filament; any desiccant, dry box or sealed container for storage must be purchased separately.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
