Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Clear 1.75mm filament spool, 0.25kg, translucent BendLay material

Lay Filaments

Lay Filaments BendLay 1.75mm 0.25kg 3D printer filament

SKU CH-KPEX-1QVYC

Tough, nearly clear filament that bends without stress whitening and prints at 230–240 °C with ±0.1 mm tolerance

  • Nearly clear prints from extremely translucent filament
  • Bends without stress whitening for durable parts
  • Safe for household, food and medical use
  • Low moisture absorption reduces warping vs ABS
  • Prints at 230-240 °C with ±0.1 mm tolerance

What BendLay filament is and who it suits

Lay Filaments BendLay is a modified butadiene filament designed for makers who need tough, nearly clear prints that stay bendable after cooling. It prints at 230-240 degC on any printer accepting 1.75 mm filament with ±0.1 mm tolerance. The 0.25 kg spool is ideal for small test parts, translucent prototypes or medical-device models where household and food safety matter. It is not for users who need large-volume spools for production runs or materials that withstand acetone smoothing.

Capacity and headroom: what it handles

The spool holds 0.25 kg of filament, enough for multiple small brackets, clear enclosures or flexible hinges without frequent changeovers. High interlayer adhesion gives strong, watertight walls even on thin features, and low moisture uptake reduces warping on unheated beds. The material softens above the 230-240 degC print window, so it cannot serve high-temperature structural parts or applications requiring acetone vapour polishing.

Thermals, noise and power draw in normal use

Printing at 230-240 degC keeps hot-end power demand moderate and within range of standard 24 V heater cartridges. No heated chamber is required, so enclosure fans and additional heating elements stay off, limiting system noise to the printer’s own motion mechanics. Low warping means fewer failed prints and less wasted machine time, indirectly reducing overall energy consumption per successful part.

Helstu kostir

  • Nearly clear prints from extremely translucent filament
  • Bends without stress whitening for durable parts
  • Safe for household, food and medical use
  • Low moisture absorption reduces warping vs ABS
  • Prints at 230-240 °C with ±0.1 mm tolerance

Tæknilýsing

BrandLay Filaments

Spurningar um þessa vöru

Will the 1.75 mm diameter with ± 0.1 mm tolerance feed reliably through the Bowden tube on my older printer?

Yes, the 1.75 mm filament with ± 0.1 mm tolerance matches the standard size used by most Bowden and direct-drive extruders, so it will feed without modification.

How can I verify the BendLay is printing correctly at 230 - 240 °C on my machine?

Look for strong layer adhesion, a nearly clear translucent finish, and no stress whitening when the printed part is bent — these show the temperature is right.

Does the 0.25 kg spool include a desiccant pack or must I buy one separately for moisture control?

The spool contains only the BendLay filament; any desiccant, dry box or sealed container for storage must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.