SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00500607BTC
Stokta
LORDWORLD
LORDWORLD PCIe to MiniPCIe HAT+ 16-pin development board
Adds MiniPCIe expansion to Raspberry Pi 5 via 16-pin cable, supporting wireless NICs, AI modules and USB Bluetooth
- Driver-free plug-and-play setup on Raspberry Pi 5
- Connects via 16-pin PCIe cable to the Pi 5
- Accepts MiniPCIe wireless NICs and AI modules
- Enables USB Bluetooth input after NIC installation
- Includes thermal tape for official active cooler mounting
Raspberry Pi 5 PCIe HAT+
This development board converts the Raspberry Pi 5 16-pin PCIe interface to a MiniPCIe slot. It targets makers and engineers who need to add wireless NICs or AI accelerator modules to the single-board computer without custom wiring.
Driver-free MiniPCIe expansion
The adapter operates plug-and-play once a compatible MiniPCIe card is installed. Adding a wireless NIC also enables a USB Bluetooth pathway into the Pi, letting the module feed Bluetooth signals through the board's USB connection without extra drivers.
Thermal-tape mounting with official cooler
Installation requires applying the supplied thermal tapes before fitting the official Raspberry Pi Active Cooler on top of the HAT. The 16-pin cable routes the PCIe link away from the Pi's GPIO header, keeping the primary expansion header free for other add-ons.
Öne çıkanlar
- Driver-free plug-and-play setup on Raspberry Pi 5
- Connects via 16-pin PCIe cable to the Pi 5
- Accepts MiniPCIe wireless NICs and AI modules
- Enables USB Bluetooth input after NIC installation
- Includes thermal tape for official active cooler mounting
Teknik özellikler
| Brand | LORDWORLD |
|---|
Bu ürünle ilgili sorular
Will the 16-pin PCIe cable or thermal tapes need replacement after extended use?
The HAT+ connects to the Raspberry Pi 5 through a 16-pin PCIe cable and installs with supplied thermal tapes and the official active cooler; both are passive components with no defined service interval.
What limits throughput when a MiniPCIe network card runs continuously on this adapter?
Sustained throughput is bounded by the Raspberry Pi 5's single-lane PCIe Gen 2 link and the MiniPCIe card's own capabilities, not by the HAT+ itself.
Does the board add audible noise or extra heat when a wireless module runs all day?
The adapter has no fan or active parts; heat comes from the installed MiniPCIe module and is managed by the Pi 5's official active cooler mounted above the HAT+.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
