Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green rectangular development board with 16-pin PCIe connector and MiniPCIe slot, silver mounting holes, gold edge contacts

LORDWORLD

LORDWORLD PCIe to MiniPCIe HAT+ 16-pin development board

SKU CH-M9QQ-D00SW

Adds MiniPCIe expansion to Raspberry Pi 5 via 16-pin cable, supporting wireless NICs, AI modules and USB Bluetooth

  • Driver-free plug-and-play setup on Raspberry Pi 5
  • Connects via 16-pin PCIe cable to the Pi 5
  • Accepts MiniPCIe wireless NICs and AI modules
  • Enables USB Bluetooth input after NIC installation
  • Includes thermal tape for official active cooler mounting

Raspberry Pi 5 PCIe HAT+

This development board converts the Raspberry Pi 5 16-pin PCIe interface to a MiniPCIe slot. It targets makers and engineers who need to add wireless NICs or AI accelerator modules to the single-board computer without custom wiring.

Driver-free MiniPCIe expansion

The adapter operates plug-and-play once a compatible MiniPCIe card is installed. Adding a wireless NIC also enables a USB Bluetooth pathway into the Pi, letting the module feed Bluetooth signals through the board's USB connection without extra drivers.

Thermal-tape mounting with official cooler

Installation requires applying the supplied thermal tapes before fitting the official Raspberry Pi Active Cooler on top of the HAT. The 16-pin cable routes the PCIe link away from the Pi's GPIO header, keeping the primary expansion header free for other add-ons.

Points forts

  • Driver-free plug-and-play setup on Raspberry Pi 5
  • Connects via 16-pin PCIe cable to the Pi 5
  • Accepts MiniPCIe wireless NICs and AI modules
  • Enables USB Bluetooth input after NIC installation
  • Includes thermal tape for official active cooler mounting

Caractéristiques

BrandLORDWORLD

Questions sur cet article

Will the 16-pin PCIe cable or thermal tapes need replacement after extended use?

The HAT+ connects to the Raspberry Pi 5 through a 16-pin PCIe cable and installs with supplied thermal tapes and the official active cooler; both are passive components with no defined service interval.

What limits throughput when a MiniPCIe network card runs continuously on this adapter?

Sustained throughput is bounded by the Raspberry Pi 5's single-lane PCIe Gen 2 link and the MiniPCIe card's own capabilities, not by the HAT+ itself.

Does the board add audible noise or extra heat when a wireless module runs all day?

The adapter has no fan or active parts; heat comes from the installed MiniPCIe module and is managed by the Pi 5's official active cooler mounted above the HAT+.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.